Case-IH 4240 (PRO) vs International Harvester 786
11 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (73%); they were not built in overlapping years (1993–1998; 1980–1981). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
11 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 4240 (PRO) | 786 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 88.8 hp | 79.9 hp | +11% 4240 (PRO) |
| Engine declared | IHC D-268 or D-268/68 | INTERNATIONAL HARVESTER D-358 | differs |
| Displacement declared | 4.39 L | 5.87 L | +34% 786 |
| Maximum torque declared | 232 lb·ft · 315 N·m | 251 lb·ft · 340 N·m | +8% 786 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal-operated dry single-plate clutch | Pedal operated DYNA-LIFE clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 12.0 gpm · 45.5 L/min | — |
| Three-point lift at ends declared | 7,374 lb · 3,345 kg | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,691 lb · 3,035 kg | 11,590 lb · 5,257 kg | +73% 786 |
| Maximum permissible mass declared | 12,125 lb · 5,500 kg | — | — |
| Wheelbase declared | 88.0 in · 2,235 mm | 104.8 in · 2,662 mm | +19% 786 |
| Length declared | 148.0 in · 3,759 mm | 165.0 in · 4,191 mm | +11% 786 |
| Width declared | 73.0 in · 1,854 mm | 102.0 in · 2,591 mm | +40% 786 |
| Height declared | 105.0 in · 2,666 mm | 112.0 in · 2,845 mm | +7% 786 |
| Ground clearance declared | 20.3 in · 515 mm | 13.0 in · 330 mm | +56% 4240 (PRO) |
| Turning radius, braked declared | — | 11.9 ft · 3.63 m | — |
| Fuel tank declared | 118.3 qt · 112.0 L | 199.7 qt · 189.0 L | +69% 786 |
Case-IH 4240 (PRO) sources
Source
- Source: Traktorenlexikon, “Case-IH 4240”
International Harvester 786 sources
Source
- Source: Traktorenlexikon, “IHC 786”