Case-IH C 70 vs VALMET 665

13 material differences

Tractor one

1992–1997

No measured PTO figure

Tractor two

1992–1997

No measured PTO figure

Which should you choose?

Read our verdict on the C 70 and the 665 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 3 fields identical or within 5%, which is not counted as material

Case-IH C 70 and VALMET 665, field by field
Field	C 70	665	Gap
Engine
Engine power, claimed claimed	69.1 hp	78.9 hp	+14% 665
Engine declared	Steyr WD 301.87	VALMET 420 D	differs
Displacement declared	3.12 L	4.40 L	+41% 665
Maximum torque declared	198 lb·ft · 268 N·m	214 lb·ft · 290 N·m	+8% 665
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry Fichtel & Sachs double clutch	Dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	11.5 gpm · 43.5 L/min	13.8 gpm · 52.4 L/min	+20% 665
Pressure declared	3,481 psi · 240 bar	2,901 psi · 200 bar	+20% C 70
Three-point lift at ends declared	5,181 lb · 2,350 kg	5,688 lb · 2,580 kg	+10% 665
Rear PTO speeds declared	540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	6,746 lb · 3,060 kg	7,231 lb · 3,280 kg	+7% 665
Maximum permissible mass declared	9,921 lb · 4,500 kg	—	—
Wheelbase declared	87.8 in · 2,229 mm	94.1 in · 2,390 mm	+7% 665
Length declared	149.8 in · 3,805 mm	157.5 in · 4,000 mm	—
Width declared	76.6 in · 1,945 mm	79.9 in · 2,030 mm	—
Height declared	95.5 in · 2,425 mm	101.2 in · 2,570 mm	+6% 665
Ground clearance declared	15.4 in · 390 mm	18.1 in · 460 mm	+18% 665
Turning radius, braked declared	—	15.7 ft · 4.80 m	—
Fuel tank declared	66.6 qt · 63.0 L	77.1 qt · 73.0 L	+16% 665

Source

Source