Case-IH C-42 (A) vs Hürlimann H-345 (A)

6 material differences · fewer than 12

Tractor one

1992–1996

No measured PTO figure

Tractor two

1982–1986

No measured PTO figure

Which should you choose?

Read our verdict on the C-42 (A) and the H-345 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH C-42 (A) and Hürlimann H-345 (A), field by field
Field	C-42 (A)	H-345 (A)	Gap
Engine
Engine power, claimed claimed	41.4 hp	47.3 hp	+14% H-345 (A)
Engine declared	Steyr WD 308.48	SAME 983-L	differs
Displacement declared	2.36 L	2.72 L	+15% H-345 (A)
Maximum torque declared	108 lb·ft · 147 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	—	Dry double clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	—	9.0 gpm · 34.0 L/min	—
Three-point lift at ends declared	4,012 lb · 1,820 kg	3,889 lb · 1,764 kg	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,214 lb · 2,365 kg	4,453 lb · 2,020 kg	+17% C-42 (A)
Maximum permissible mass declared	7,716 lb · 3,500 kg	—	—
Wheelbase declared	77.5 in · 1,968 mm	76.6 in · 1,945 mm	—
Length declared	129.9 in · 3,300 mm	126.0 in · 3,200 mm	—
Width declared	73.6 in · 1,870 mm	67.7 in · 1,720 mm	+9% C-42 (A)
Height declared	89.0 in · 2,260 mm	86.6 in · 2,200 mm	—
Ground clearance declared	18.1 in · 460 mm	18.7 in · 475 mm	—
Turning radius, braked declared	10.8 ft · 3.28 m	—	—
Fuel tank declared	56.0 qt · 53.0 L	57.1 qt · 54.0 L	—

Source

Source