Case-IH C-42 (A) vs Ford 2110 (A)

11 material differences · fewer than 12

Tractor one

1992–1996

No measured PTO figure

Tractor two

1983–1987

No measured PTO figure

Which should you choose?

Read our verdict on the C-42 (A) and the 2110 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 2 fields identical or within 5%, which is not counted as material

Case-IH C-42 (A) and Ford 2110 (A), field by field
Field	C-42 (A)	2110 (A)	Gap
Engine
Engine power, claimed claimed	41.4 hp	37.4 hp	+11% C-42 (A)
Engine declared	Steyr WD 308.48	ISHIKAWAJIMA-SHIBAURA T-854 B	differs
Displacement declared	2.36 L	2.30 L	—
Maximum torque declared	108 lb·ft · 147 N·m	90 lb·ft · 121.4 N·m	+21% C-42 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	—	8.6 gpm · 32.5 L/min	—
Three-point lift at ends declared	4,012 lb · 1,820 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,214 lb · 2,365 kg	3,660 lb · 1,660 kg	+42% C-42 (A)
Maximum permissible mass declared	7,716 lb · 3,500 kg	—	—
Wheelbase declared	77.5 in · 1,968 mm	73.4 in · 1,864 mm	+6% C-42 (A)
Length declared	129.9 in · 3,300 mm	130.7 in · 3,320 mm	—
Width declared	73.6 in · 1,870 mm	61.4 in · 1,560 mm	+20% C-42 (A)
Height declared	89.0 in · 2,260 mm	79.9 in · 2,029 mm	+11% C-42 (A)
Ground clearance declared	18.1 in · 460 mm	15.4 in · 390 mm	+18% C-42 (A)
Turning radius, braked declared	10.8 ft · 3.28 m	9.5 ft · 2.90 m	+13% C-42 (A)
Fuel tank declared	56.0 qt · 53.0 L	42.5 qt · 40.2 L	+32% C-42 (A)

Source

Source