Case-IH C-48 (A) vs VALMET 4100

14 material differences

Tractor one

1995–1996

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the C-48 (A) and the 4100 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 3 fields identical or within 5%, which is not counted as material

Case-IH C-48 (A) and VALMET 4100, field by field
Field	C-48 (A)	4100	Gap
Engine
Engine power, claimed claimed	47.3 hp	52 hp	+10% 4100
Engine declared	Steyr WD 308.85	VALMET 320 D	differs
Displacement declared	2.36 L	3.30 L	+40% 4100
Maximum torque declared	108 lb·ft · 147 N·m	144 lb·ft · 195 N·m	+33% 4100
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Dry Valeo double clutch type DL-2	dry double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	7.8 gpm · 29.4 L/min	10.3 gpm · 39.0 L/min	+33% 4100
Pressure declared	3,553 psi · 245 bar	2,901 psi · 200 bar	+23% C-48 (A)
Three-point lift at ends declared	4,012 lb · 1,820 kg	6,294 lb · 2,855 kg	+57% 4100
Rear PTO speeds declared	540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	5,093 lb · 2,310 kg	5,864 lb · 2,660 kg	+15% 4100
Maximum permissible mass declared	7,716 lb · 3,500 kg	—	—
Wheelbase declared	77.5 in · 1,968 mm	83.1 in · 2,112 mm	+7% 4100
Length declared	129.5 in · 3,290 mm	149.2 in · 3,790 mm	+15% 4100
Width declared	68.5 in · 1,740 mm	68.0 in · 1,728 mm	—
Height declared	90.2 in · 2,290 mm	92.5 in · 2,350 mm	—
Ground clearance declared	17.5 in · 445 mm	16.7 in · 425 mm	—
Turning radius, braked declared	10.5 ft · 3.19 m	12.8 ft · 3.90 m	+22% 4100
Fuel tank declared	56.0 qt · 53.0 L	100.4 qt · 95.0 L	+79% 4100

Source

Source