Case-IH C-48 (A) vs Massey Ferguson MF 4215 (A)

13 material differences

Tractor one

1995–1996

No measured PTO figure

Tractor two

1997–2001

No measured PTO figure

Which should you choose?

Read our verdict on the C-48 (A) and the MF 4215 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 2 fields identical or within 5%, which is not counted as material

Case-IH C-48 (A) and Massey Ferguson MF 4215 (A), field by field
Field	C-48 (A)	MF 4215 (A)	Gap
Engine
Engine power, claimed claimed	47.3 hp	51.4 hp	+8% MF 4215 (A)
Engine declared	Steyr WD 308.85	Perkins 903.27	differs
Displacement declared	2.36 L	2.70 L	+15% MF 4215 (A)
Maximum torque declared	108 lb·ft · 147 N·m	136 lb·ft · 184 N·m	+25% MF 4215 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Dry Valeo double clutch type DL-2	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	7.8 gpm · 29.4 L/min	—	—
Pressure declared	3,553 psi · 245 bar	2,031 psi · 140 bar	+75% C-48 (A)
Three-point lift at ends declared	4,012 lb · 1,820 kg	4,718 lb · 2,140 kg	+18% MF 4215 (A)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,093 lb · 2,310 kg	5,258 lb · 2,385 kg	—
Maximum permissible mass declared	7,716 lb · 3,500 kg	—	—
Wheelbase declared	77.5 in · 1,968 mm	83.9 in · 2,130 mm	+8% MF 4215 (A)
Length declared	129.5 in · 3,290 mm	149.0 in · 3,785 mm	+15% MF 4215 (A)
Width declared	68.5 in · 1,740 mm	78.0 in · 1,982 mm	+14% MF 4215 (A)
Height declared	90.2 in · 2,290 mm	99.0 in · 2,515 mm	+10% MF 4215 (A)
Ground clearance declared	17.5 in · 445 mm	8.3 in · 210 mm	+112% C-48 (A)
Turning radius, braked declared	10.5 ft · 3.19 m	—	—
Fuel tank declared	56.0 qt · 53.0 L	90.9 qt · 86.0 L	+62% MF 4215 (A)

Source

Source