Case-IH C-48 (A) vs IMT 560

11 material differences · fewer than 12

Tractor one

1995–1996

No measured PTO figure

Tractor two

1980–1986

No measured PTO figure

Which should you choose?

Read our verdict on the C-48 (A) and the 560 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Case-IH C-48 (A) and IMT 560, field by field
Field	C-48 (A)	560	Gap
Engine
Engine power, claimed claimed	47.3 hp	57.3 hp	+21% 560
Engine declared	Steyr WD 308.85	IMT-PERKINS M-34/T	differs
Displacement declared	2.36 L	3.33 L	+41% 560
Maximum torque declared	108 lb·ft · 147 N·m	144 lb·ft · 195 N·m	+33% 560
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Dry Valeo double clutch type DL-2	Pedal-operated dry two-stage double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	7.8 gpm · 29.4 L/min	—	—
Pressure declared	3,553 psi · 245 bar	—	—
Three-point lift at ends declared	4,012 lb · 1,820 kg	3,869 lb · 1,755 kg	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,093 lb · 2,310 kg	5,445 lb · 2,470 kg	+7% 560
Maximum permissible mass declared	7,716 lb · 3,500 kg	—	—
Wheelbase declared	77.5 in · 1,968 mm	87.0 in · 2,210 mm	+12% 560
Length declared	129.5 in · 3,290 mm	156.5 in · 3,975 mm	+21% 560
Width declared	68.5 in · 1,740 mm	69.3 in · 1,760 mm	—
Height declared	90.2 in · 2,290 mm	87.0 in · 2,210 mm	—
Ground clearance declared	17.5 in · 445 mm	17.1 in · 434 mm	—
Turning radius, braked declared	10.5 ft · 3.19 m	13.2 ft · 4.03 m	+26% 560
Fuel tank declared	56.0 qt · 53.0 L	95.1–116.2 qt · 90.0–110.0 L	differs

Source

Source