Case-IH C-48 (A) vs Fiat 466 (DT)

13 material differences

Tractor one

1995–1996

No measured PTO figure

Tractor two

1982–1986

No measured PTO figure

Which should you choose?

Read our verdict on the C-48 (A) and the 466 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 3 fields identical or within 5%, which is not counted as material

Case-IH C-48 (A) and Fiat 466 (DT), field by field
Field	C-48 (A)	466 (DT)	Gap
Engine
Engine power, claimed claimed	47.3 hp	53.2 hp	+12% 466 (DT)
Engine declared	Steyr WD 308.85	FIAT-IVECO 8035.02.276 or 376	differs
Displacement declared	2.36 L	2.59 L	+10% 466 (DT)
Maximum torque declared	108 lb·ft · 147 N·m	125 lb·ft · 170 N·m	+16% 466 (DT)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Dry Valeo double clutch type DL-2	dry O.M.G, VALEO or LuK double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	7.8 gpm · 29.4 L/min	—	—
Pressure declared	3,553 psi · 245 bar	3,336–3,481 psi · 230–240 bar	differs
Three-point lift at ends declared	4,012 lb · 1,820 kg	5,732 lb · 2,600 kg	+43% 466 (DT)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,093 lb · 2,310 kg	5,027 lb · 2,280 kg	—
Maximum permissible mass declared	7,716 lb · 3,500 kg	—	—
Wheelbase declared	77.5 in · 1,968 mm	85.6 in · 2,175 mm	+11% 466 (DT)
Length declared	129.5 in · 3,290 mm	126.9 in · 3,222 mm	—
Width declared	68.5 in · 1,740 mm	75.6 in · 1,920 mm	+10% 466 (DT)
Height declared	90.2 in · 2,290 mm	93.3 in · 2,370 mm	—
Ground clearance declared	17.5 in · 445 mm	19.5 in · 495 mm	+11% 466 (DT)
Turning radius, braked declared	10.5 ft · 3.19 m	11.8 ft · 3.60 m	+13% 466 (DT)
Fuel tank declared	56.0 qt · 53.0 L	77.1 qt · 73.0 L	+38% 466 (DT)

Source

Source