Case-IH 9380 or New Holland T 9030?
Which should you choose?
On performance, every comparable figure that differs favours the New Holland T 9030: hydraulic flow and three-point lift.
- The New Holland T 9030 suits loader and hydraulic implement work better on this data: 48% (49.6 L/min / 13.1 gpm) more hydraulic flow and 15% (1,194 kg / 2,632 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 9380 | T 9030 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 269.0 kW (360.7 hp)Traktorenlexikon, “Case-IH 9380” | 258.8 kW (347.1 hp)Traktorenlexikon, “New Holland T9030” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 9380 and the T 9030. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 9380 and the T 9030. |
| Which pumps more oil for implements? | 104.1 L/min (27.5 gpm)Traktorenlexikon, “Case-IH 9380” | 153.7 L/min (40.6 gpm)Traktorenlexikon, “New Holland T9030” | AheadThe New Holland T 9030 has 48% more hydraulic flow (49.6 L/min / 13.1 gpm) than the Case-IH 9380 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 7,711 kg (17,000 lb)Traktorenlexikon, “Case-IH 9380” | 8,905 kg (19,632 lb)Traktorenlexikon, “New Holland T9030” | AheadThe New Holland T 9030 has 15% more lift (1,194 kg / 2,632 lb) than the Case-IH 9380 (both lift through the full range 610 mm behind the ends, as stated by the source). |
| Which is heavier, for traction? | 14,325 kg (31,581 lb)Traktorenlexikon, “Case-IH 9380” | 18,951 kg (41,780 lb)Traktorenlexikon, “New Holland T9030” | Ahead (a fact, not an advantage)The New Holland T 9030 is 32% heavier (4,626 kg / 10,199 lb) than the Case-IH 9380 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | 20,684 kg (45,600 lb)Traktorenlexikon, “New Holland T9030” | No figureNo call on maximum permissible mass: no figure on record for the 9380. |
| Which has the wider choice of gears? | 12 to 24Traktorenlexikon, “Case-IH 9380” | 16Traktorenlexikon, “New Holland T9030” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 9380 and the T 9030. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Case-IH 9380” | 30 km/h (18.6 mph)Traktorenlexikon, “New Holland T9030” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 1000 rpmTraktorenlexikon, “Case-IH 9380” | 1000 rpmTraktorenlexikon, “New Holland T9030” | EvenEven on PTO speeds: the same speeds (1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “New Holland T9030” | No figureNo call on PTO independence: not stated for the 9380. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Case-IH 9380” | 4WDTraktorenlexikon, “New Holland T9030” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1995–2000 | 2007–2010 | Ahead (a fact, not an advantage)The New Holland T 9030 is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The New Holland T 9030 has 48% more hydraulic flow (49.6 L/min / 13.1 gpm) than the Case-IH 9380 (both pump flow, as stated by the source).
- The New Holland T 9030 has 15% more lift (1,194 kg / 2,632 lb) than the Case-IH 9380 (both lift through the full range 610 mm behind the ends, as stated by the source).
- The New Holland T 9030 is 32% heavier (4,626 kg / 10,199 lb) than the Case-IH 9380 (both unladen weight, as stated by the source).
- The New Holland T 9030 is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO speeds: the same speeds (1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources