Case-IH 9370 vs John Deere 8960
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the 9370 and the 8960 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | 9370 | 8960 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 355.1 hp | 365.2 hp | — |
| Engine declared | CUMMINS N-14 360 A | Cummins NTA 855 A 370 | differs |
| Displacement declared | 14.02 L | 14.01 L | — |
| Maximum torque declared | 1,172 lb·ft · 1,589 N·m | 1,279 lb·ft · 1,734 N·m | +9% 8960 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Oil-bath multi-plate clutch | Pedal-operated hydraulic and oil-cooled double disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Pump flow declared | 27.2 gpm · 103.0 L/min | — | — |
| Pressure declared | 3,002 psi · 207 bar | 2,857–3,162 psi · 197–218 bar | differs |
| Three-point lift at ends declared | 26,056 lb · 11,819 kg | 11,795–12,125 lb · 5,350–5,500 kg | differs |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 33,786 lb · 15,325 kg | 35,109 lb · 15,925 kg | — |
| Wheelbase declared | 144.0 in · 3,658 mm | 133.9 in · 3,400 mm | +8% 9370 |
| Length declared | 296.7 in · 7,535 mm | 286.1 in · 7,266 mm | — |
| Width declared | 158.4 in · 4,023 mm | 152.4 in · 3,870 mm | — |
| Height declared | 142.8 in · 3,627 mm | 138.0 in · 3,505 mm | — |
| Ground clearance declared | 14.4 in · 365 mm | 14.9 in · 378 mm | — |
| Fuel tank declared | 1,079.9 qt · 1,022.0 L | 882.3 qt · 835.0 L | +22% 9370 |
Case-IH 9370 sources
Source
- Source: Traktorenlexikon, “Case-IH 9370”
John Deere 8960 sources
Source
- Source: Traktorenlexikon, “John Deere 8960”