8 material differences · fewer than 12
Tractor oneCase-IH 93501995–2000No measured PTO figureTractor twoJohn Deere 87601989–1993No measured PTO figure
Which should you choose?
Read our verdict on the 9350 and the 8760 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 9350 | 8760 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 306 hp | 296.1 hp | — |
| Engine declared | CUMMINS MTA-11 A | John Deere 6.101 HRW-02 | differs |
| Displacement declared | 10.82 L | 10.14 L | +7% 9350 |
| Maximum torque declared | 1,016 lb·ft · 1,378 N·m | 904 lb·ft · 1,225 N·m | +12% 9350 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–21.7 mph · 30–35 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Pump flow declared | 27.2 gpm · 103.0 L/min | — | — |
| Pressure declared | 2,495 psi · 172 bar | 2,538 psi · 175 bar | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 28,722 lb · 13,028 kg | 32,088 lb · 14,555 kg | +12% 8760 |
| Wheelbase declared | 132.5 in · 3,366 mm | 133.9 in · 3,400 mm | — |
| Length declared | 296.7 in · 7,535 mm | 286.1 in · 7,266 mm | — |
| Width declared | 136.9 in · 3,477 mm | 139.8–150.6 in · 3,550–3,825 mm | differs |
| Height, over the cab declared | 135.2 in · 3,434 mm | 137.0 in · 3,480 mm | — |
| Ground clearance declared | 11.7 in · 297 mm | 13.9 in · 353 mm | +19% 8760 |
| Turning radius, braked declared | 12.8 ft · 3.90 m | — | — |
| Fuel tank declared | 799.9 qt · 757.0 L | 882.3 qt · 835.0 L | +10% 8760 |
Case-IH 9350 sources
Source
- Source: Traktorenlexikon, “Case-IH 9350”
John Deere 8760 sources
Source
- Source: Traktorenlexikon, “John Deere 8760”