Case-IH 9330 or New Holland 9184?
Which should you choose?
On performance, every comparable figure that differs favours the New Holland 9184: hydraulic flow.
- The New Holland 9184 suits loader and hydraulic implement work better on this data: 53% (57.1 L/min / 15.1 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 9330 | 9184 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 161.8 kW (217.0 hp)Traktorenlexikon, “Case-IH 9330” | 170.8 kW (229.0 hp)Traktorenlexikon, “New Holland 9184” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 9330 and the 9184. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 9330 and the 9184. |
| Which pumps more oil for implements? | 108.6 L/min (28.7 gpm)Traktorenlexikon, “Case-IH 9330” | 165.7 L/min (43.8 gpm)Traktorenlexikon, “New Holland 9184” | AheadThe New Holland 9184 has 53% more hydraulic flow (57.1 L/min / 15.1 gpm) than the Case-IH 9330 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 7,250 kg (15,984 lb)Traktorenlexikon, “Case-IH 9330” | — | No figureNo call on three-point lift: no figure on record for the 9184. |
| Which is heavier, for traction? | 10,727 kg (23,649 lb)Traktorenlexikon, “Case-IH 9330” | 11,327 kg (24,972 lb)Traktorenlexikon, “New Holland 9184” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | 13,254 kg (29,220 lb)Traktorenlexikon, “New Holland 9184” | No figureNo call on maximum permissible mass: no figure on record for the 9330. |
| Which has the wider choice of gears? | 12Traktorenlexikon, “Case-IH 9330” | 12Traktorenlexikon, “New Holland 9184” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 9330 and the 9184. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Case-IH 9330” | 30 km/h (18.6 mph)Traktorenlexikon, “New Holland 9184” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 1000 rpmTraktorenlexikon, “Case-IH 9330” | 1000 rpmTraktorenlexikon, “New Holland 9184” | EvenEven on PTO speeds: the same speeds (1000 rpm). |
| Which PTO runs independently of the ground drive? | — | — | No figureNo call on PTO independence: not stated for the 9330 and the 9184. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Case-IH 9330” | 4WDTraktorenlexikon, “New Holland 9184” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1995–2000 | 2000–2001 | Ahead (a fact, not an advantage)The New Holland 9184 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The New Holland 9184 has 53% more hydraulic flow (57.1 L/min / 15.1 gpm) than the Case-IH 9330 (both pump flow, as stated by the source).
- The New Holland 9184 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO speeds: the same speeds (1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources