7 material differences · fewer than 12
Tractor oneCase-IH 93301995–2000No measured PTO figureTractor twoInternational Harvester 73881981No measured PTO figure
Which should you choose?
Read our verdict on the 9330 and the 7388 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 9330 | 7388 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 236.7 hp | 229.9 hp | — |
| Engine declared | CUMMINS 6 TA-830 A | INTERNATIONAL HARVESTER DTI-466 | differs |
| Displacement declared | 8.27 L | 7.64 L | +8% 9330 |
| Maximum torque declared | 754 lb·ft · 1,022 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Oil-immersed U.V.C. multi-plate clutch | Pedal-operated dry double-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 28.7 gpm · 108.6 L/min | 16.0 gpm · 60.6 L/min | +79% 9330 |
| Pressure declared | 2,495 psi · 172 bar | — | — |
| Rear PTO speeds declared | 1000 rpm | — | — |
| Weight & dimensions | |||
| Unladen weight declared | 23,649 lb · 10,727 kg | 19,500 lb · 8,845 kg | +21% 9330 |
| Wheelbase declared | 120.4 in · 3,058 mm | 118.0 in · 2,997 mm | — |
| Length declared | 252.4 in · 6,410 mm | 246.0 in · 6,248 mm | — |
| Width declared | 113.8 in · 2,890 mm | 116.0 in · 2,946 mm | — |
| Ground clearance declared | 11.0 in · 280 mm | 12.9 in · 328 mm | +17% 7388 |
| Turning radius, braked declared | 12.8 ft · 3.90 m | — | — |
| Fuel tank declared | 459.7 qt · 435.0 L | 775.9 qt · 734.3 L | +69% 7388 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH 9330 sources
Source
- Source: Traktorenlexikon, “Case-IH 9330”
International Harvester 7388 sources
Source
- Source: Traktorenlexikon, “IHC 7388”
- Source: Traktorenlexikon, “IHC 4386”