Case-IH 9240 vs Massey Ferguson MF 8270 A
12 material differences
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (31%); they were not built in overlapping years (1990–1994; 1999–2002). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
12 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 9240 | MF 8270 A | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 231.7 hp | 227.0 hp | — |
| Engine declared | CUMMINS 6 TA-830 | VALMET 645 DSBIE | differs |
| Displacement declared | 8.27 L | 8.42 L | — |
| Maximum torque declared | 603 lb·ft · 818 N·m | 710 lb·ft · 963 N·m | +18% MF 8270 A |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 24.9 mph · 40 km/h | +33% MF 8270 A |
| Clutch declared | F.T.K. multi-plate clutch running in oil bath | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 29.1 gpm · 110.2 L/min | 32.4 gpm · 122.5 L/min | +11% MF 8270 A |
| Pressure declared | 3,002 psi · 207 bar | 3,205 psi · 221 bar | +7% MF 8270 A |
| Three-point lift at ends declared | 14,703 lb · 6,669 kg | 22,931 lb · 10,401 kg | +56% MF 8270 A |
| Rear PTO speeds declared | 1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 28,215 lb · 12,798 kg | 21,594 lb · 9,795 kg | +31% 9240 |
| Maximum permissible mass declared | — | 30,865 lb · 14,000 kg | — |
| Wheelbase declared | 124.0 in · 3,150 mm | 121.1 in · 3,075 mm | — |
| Length declared | 256.6 in · 6,517 mm | 205.5 in · 5,220 mm | +25% 9240 |
| Width declared | 104.8 in · 2,661 mm | 99.1 in · 2,518 mm | +6% 9240 |
| Height declared | 125.9 in · 3,198 mm | 123.6 in · 3,140 mm | — |
| Ground clearance declared | 13.4 in · 340 mm | 19.7 in · 500 mm | +47% MF 8270 A |
| Fuel tank declared | 799.9 qt · 757.0 L | 433.2 qt · 410.0 L | +85% 9240 |
Case-IH 9240 sources
Source
- Source: Traktorenlexikon, “Case-IH 9240”
- Source: Traktorenlexikon, “Case-IH 7230 PRO/8930”
Massey Ferguson MF 8270 A sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 8270”