Case-IH 9170 vs New Holland 9684 (Traktorenlexikon)

10 material differences · fewer than 12

Tractor one

1987–1990

No measured PTO figure

Tractor two

2000–2001

No measured PTO figure

Which should you choose?

Read our verdict on the 9170 and the 9684 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 3 fields identical or within 5%, which is not counted as material

Case-IH 9170 and New Holland 9684 (Traktorenlexikon), field by field
Field	9170	9684	Gap
Engine
Engine power, claimed claimed	330.4 hp	355.1 hp	+7% 9684
Engine declared	CUMMINS NTA-885 A	CUMMINS N 14-360	differs
Displacement declared	14.02 L	14.04 L	—
Maximum torque declared	1,176 lb·ft · 1,595 N·m	1,099 lb·ft · 1,490 N·m	+7% 9170
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	oil-bath multi-plate clutch, driving clutch with disc diameter	—	—
Hydraulics & hitch
Pump flow declared	31.0 gpm · 117.3 L/min	49.0 gpm · 185.5 L/min	+58% 9684
Pressure declared	2,306 psi · 159 bar	—	—
Three-point lift at ends declared	25,741 lb · 11,676 kg	20,216 lb · 9,170 kg	+27% 9170
Rear PTO speeds declared	1000 rpm	1000 rpm	—
Weight & dimensions
Unladen weight declared	33,962 lb · 15,405 kg	30,794 lb · 13,968 kg	+10% 9170
Wheelbase declared	141.5 in · 3,594 mm	133.1 in · 3,380 mm	+6% 9170
Length declared	281.9 in · 7,160 mm	266.0 in · 6,756 mm	+6% 9170
Width declared	119.7 in · 3,040 mm	150.4 in · 3,820 mm	+26% 9684
Height declared	149.6 in · 3,800 mm	136.9 in · 3,477 mm	+9% 9170
Ground clearance declared	13.9 in · 353 mm	—	—
Turning radius, braked declared	—	14.4 ft · 4.40 m	—
Fuel tank declared	1,001.7 qt · 948.0 L	920.0 qt · 870.6 L	+9% 9170

Source

Source