Case-IH 9130 or Case-IH 9230?

Which should you choose?

On performance, no comparable figure differs by more than its threshold: on this data the machines are level.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Case-IH 9130 and Case-IH 9230, with the call on each
Question91309230Call
Which puts more power through the PTO shaft?142.6 kW (191.2 hp)Traktorenlexikon, “Case-IH 9130”155.0 kW (207.9 hp)Traktorenlexikon, “Case-IH 9230”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 9130 and the 9230.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 9130 and the 9230.
Which pumps more oil for implements?107.1 L/min (28.3 gpm)Traktorenlexikon, “Case-IH 9130”109.8 L/min (29.0 gpm)Traktorenlexikon, “Case-IH 9230”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?6,067 kg (13,375 lb)Traktorenlexikon, “Case-IH 9130”6,384 kg (14,074 lb)Traktorenlexikon, “Case-IH 9230”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?9,560 kg (21,076 lb)Traktorenlexikon, “Case-IH 9130”10,935 kg (24,108 lb)Traktorenlexikon, “Case-IH 9230”Ahead (a fact, not an advantage)The Case-IH 9230 is 14% heavier (1,375 kg / 3,031 lb) than the Case-IH 9130 (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 9130 and the 9230.
Which has the wider choice of gears?12Traktorenlexikon, “Case-IH 9130”12Traktorenlexikon, “Case-IH 9230”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 9130 and the 9230.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Case-IH 9130”30 km/h (18.6 mph)Traktorenlexikon, “Case-IH 9230”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?1000 rpmTraktorenlexikon, “Case-IH 9130”1000 rpmTraktorenlexikon, “Case-IH 9230”EvenEven on PTO speeds: the same speeds (1000 rpm).
Which PTO runs independently of the ground drive?No figureNo call on PTO independence: not stated for the 9130 and the 9230.
Which drives on both axles?4WDTraktorenlexikon, “Case-IH 9130”4WDTraktorenlexikon, “Case-IH 9230”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1987–19901990–1995EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Case-IH 9230 is 14% heavier (1,375 kg / 3,031 lb) than the Case-IH 9130 (both unladen weight, as stated by the source).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources