Case-IH 845 XL (A) vs Lamborghini Agile 770 S (DT)

14 material differences

Tractor one

1990–1996

No measured PTO figure

Tractor two

1996–2003

No measured PTO figure

Which should you choose?

Read our verdict on the 845 XL (A) and the Agile 770 S (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 1 fields identical or within 5%, which is not counted as material

Case-IH 845 XL (A) and Lamborghini Agile 770 S (DT), field by field
Field	845 XL (A)	Agile 770 S (DT)	Gap
Engine
Engine power, claimed claimed	78.9 hp	69.1 hp	+14% 845 XL (A)
Engine declared	IH D-268	SAME 1000.3 WT 1	differs
Displacement declared	4.39 L	3.00 L	+46% 845 XL (A)
Maximum torque declared	218 lb·ft · 296 N·m	184 lb·ft · 250 N·m	+18% 845 XL (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Pedal-operated dry SAME-DEUTZ-FAHR single-disc clutch	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	8.6 gpm · 32.6 L/min	8.7 gpm · 33.0 L/min	—
Pressure declared	—	3,118 psi · 215 bar	—
Three-point lift at ends declared	6,945 lb · 3,150 kg	5,732 lb · 2,600 kg	+21% 845 XL (A)
Rear PTO speeds declared	540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,069 lb · 3,660 kg	4,894 lb · 2,220 kg	+65% 845 XL (A)
Maximum permissible mass declared	12,787 lb · 5,800 kg	—	—
Wheelbase declared	94.1 in · 2,390 mm	75.8 in · 1,926 mm	+24% 845 XL (A)
Length declared	144.9 in · 3,680 mm	116.9 in · 2,970 mm	+24% 845 XL (A)
Width declared	80.7 in · 2,050 mm	50.8 in · 1,290 mm	+59% 845 XL (A)
Height declared	105.1 in · 2,670 mm	83.1 in · 2,110 mm	+27% 845 XL (A)
Ground clearance declared	19.1 in · 484 mm	9.1 in · 230 mm	+110% 845 XL (A)
Turning radius, braked declared	12.6 ft · 3.85 m	13.4 ft · 4.07 m	+6% Agile 770 S (DT)
Fuel tank declared	112.0 qt · 106.0 L	61.3 qt · 58.0 L	+83% 845 XL (A)

Source

Source