Case-IH 7240 Magnum vs John Deere 7930

12 material differences

Tractor one

1994–1997

No measured PTO figure

Tractor two

2007–2011

No measured PTO figure

Which should you choose?

Read our verdict on the 7240 Magnum and the 7930 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

Case-IH 7240 Magnum and John Deere 7930, field by field
Field	7240 Magnum	7930	Gap
Engine
Engine power, claimed claimed	230.8 hp	217.1 hp	+6% 7240 Magnum
Engine declared	CUMMINS 6 TA-830	John Deere PowrTech-Plus 6.068 HRW-65/V4-CR	differs
Displacement declared	8.27 L	6.78 L	+22% 7240 Magnum
Maximum torque declared	687 lb·ft · 932 N·m	653 lb·ft · 885 N·m	+5% 7240 Magnum
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–31.1 mph · 30–50 km/h	differs
Clutch declared	Case-IH multi-disc clutch running in oil bath	Pedal-operated hydraulic wet multi-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	29.0 gpm · 109.8 L/min	32.0 gpm · 121.1 L/min	+10% 7930
Pressure declared	2,451 psi · 169 bar	—	—
Three-point lift at ends declared	15,759 lb · 7,148 kg	15,543 lb · 7,050 kg	—
Rear PTO speeds declared	1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	17,851 lb · 8,097 kg	17,730 lb · 8,042 kg	—
Maximum permissible mass declared	25,519 lb · 11,575 kg	28,881 lb · 13,100 kg	+13% 7930
Wheelbase declared	118.3 in · 3,006 mm	112.6 in · 2,860 mm	—
Length declared	200.4 in · 5,090 mm	212.4 in · 5,394 mm	+6% 7930
Width declared	120.0 in · 3,048 mm	86.9 in · 2,208 mm	+38% 7240 Magnum
Height declared	121.1 in · 3,077 mm	120.9 in · 3,072 mm	—
Ground clearance declared	19.3 in · 489 mm	27.2 in · 690 mm	+41% 7930
Fuel tank declared	379.4 qt · 359.0 L	378.3–414.2 qt · 358.0–392.0 L	differs

Source

Source