9 material differences · fewer than 12
Tractor oneCase-IH 7240 Magnum1994–1997No measured PTO figureTractor twoJ.I. Case 46941984–1985No measured PTO figure
Which should you choose?
Read our verdict on the 7240 Magnum and the 4694 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 7240 Magnum | 4694 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 230.8 hp | 232.8 hp | — |
| Engine declared | CUMMINS 6 TA-830 | CASE A-504 BDTL | differs |
| Displacement declared | 8.27 L | 8.26 L | — |
| Maximum torque declared | 687 lb·ft · 932 N·m | 680 lb·ft · 922 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Case-IH multi-disc clutch running in oil bath | Hydraulically operated wet disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 29.0 gpm · 109.8 L/min | 15.5 gpm · 58.7 L/min | +87% 7240 Magnum |
| Pressure declared | 2,451 psi · 169 bar | — | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 17,851 lb · 8,097 kg | 22,311 lb · 10,120 kg | +25% 4694 |
| Maximum permissible mass declared | 25,519 lb · 11,575 kg | — | — |
| Wheelbase declared | 118.3 in · 3,006 mm | 102.0 in · 2,591 mm | +16% 7240 Magnum |
| Length declared | 200.4 in · 5,090 mm | 225.0 in · 5,715 mm | +12% 4694 |
| Width declared | 120.0–182.0 in · 3,048–4,623 mm | 96.0 in · 2,438 mm | differs |
| Ground clearance declared | 19.3 in · 489 mm | 18.5 in · 470 mm | — |
| Fuel tank declared | 379.4 qt · 359.0 L | 512.5 qt · 485.0 L | +35% 4694 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH 7240 Magnum sources
- Source: Traktorenlexikon, “Case-IH 7240”
- Source: Traktorenlexikon, “Case-IH 7230 PRO/8930”
J.I. Case 4694 sources
- Source: Traktorenlexikon, “Case 4694”
- Source: Traktorenlexikon, “Case 4690”