9 material differences · fewer than 12

Tractor oneCase-IH 7240 Magnum1994–1997No measured PTO figureTractor twoCase-IH 92401990–1994No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (58%). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

9 material differences · 7 fields identical or within 5%, which is not counted as material

Case-IH 7240 Magnum and Case-IH 9240, field by field
Field	7240 Magnum	9240	Gap
Engine
Engine power, claimed claimed	230.8 hp	231.7 hp	—
Engine declared	CUMMINS 6 TA-830	CUMMINS 6 TA-830	—
Displacement declared	8.27 L	8.27 L	—
Maximum torque declared	687 lb·ft · 932 N·m	603 lb·ft · 818 N·m	+14% 7240 Magnum
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Case-IH multi-disc clutch running in oil bath	F.T.K. multi-plate clutch running in oil bath	differs
Hydraulics & hitch
Pump flow declared	29.0 gpm · 109.8 L/min	29.1 gpm · 110.2 L/min	—
Pressure declared	2,451 psi · 169 bar	3,002 psi · 207 bar	+22% 9240
Rear PTO speeds declared	1000 rpm	1000 rpm	—
Weight & dimensions
Unladen weight declared	17,851 lb · 8,097 kg	28,215 lb · 12,798 kg	+58% 9240
Maximum permissible mass declared	25,519 lb · 11,575 kg	—	—
Wheelbase declared	118.3 in · 3,006 mm	124.0 in · 3,150 mm	—
Length declared	200.4 in · 5,090 mm	256.6 in · 6,517 mm	+28% 9240
Width declared	120.0–182.0 in · 3,048–4,623 mm	104.8–162.0 in · 2,661–4,115 mm	differs
Height, over the cab declared	121.1 in · 3,077 mm	125.9 in · 3,198 mm	—
Ground clearance declared	19.3 in · 489 mm	13.4 in · 340 mm	+44% 7240 Magnum
Fuel tank declared	379.4 qt · 359.0 L	799.9 qt · 757.0 L	+111% 9240

Case-IH 7240 Magnum sources

Source

Source: Traktorenlexikon, “Case-IH 7240”
Source: Traktorenlexikon, “Case-IH 7230 PRO/8930”

Case-IH 9240 sources