12 material differences
Tractor oneCase-IH 7230 Magnum1994–1997No measured PTO figureTractor twoFendt 820 Vario2006–2011No measured PTO figure
Which should you choose?
Read our verdict on the 7230 Magnum and the 820 Vario → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 7230 Magnum | 820 Vario | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 204.1 hp | 202 hp | — |
| Engine declared | CUMMINS 6 T-830 | Deutz AG TCD 2012 LO6 4V | differs |
| Displacement declared | 8.27 L | 6.06 L | +37% 7230 Magnum |
| Maximum torque declared | 586 lb·ft · 795 N·m | 660 lb·ft · 895 N·m | +13% 820 Vario |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 31.1 mph · 50 km/h | differs |
| Clutch declared | Case-IH multi-plate clutch running in oil bath | — | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 29.3 gpm · 110.9 L/min | — | — |
| Pressure declared | 2,451 psi · 169 bar | 2,901 psi · 200 bar | +18% 820 Vario |
| Rear PTO speeds declared | 540/1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 17,789 lb · 8,069 kg | 15,840 lb · 7,185 kg | +12% 7230 Magnum |
| Maximum permissible mass declared | 25,519 lb · 11,575 kg | — | — |
| Wheelbase declared | 118.3 in · 3,006 mm | 107.1 in · 2,720 mm | +11% 7230 Magnum |
| Length declared | 200.1 in · 5,083 mm | 187.1 in · 4,753 mm | +7% 7230 Magnum |
| Width declared | 120.0–182.0 in · 3,048–4,623 mm | 101.2 in · 2,570 mm | differs |
| Ground clearance declared | 17.9 in · 454 mm | 22.3 in · 566 mm | +25% 820 Vario |
| Turning radius, braked declared | — | 18.4 ft · 5.60 m | — |
| Fuel tank declared | 273.7–379.4 qt · 259.0–359.0 L | 359.3 qt · 340 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH 7230 Magnum sources
Source
- Source: Traktorenlexikon, “Case-IH 7230”
- Source: Traktorenlexikon, “Case-IH 7110”
Fendt 820 Vario sources
Source
- Source: Traktorenlexikon, “Fendt 820 Vario”
- Source: Traktorenlexikon, “Fendt 718 Vario”