7 material differences · fewer than 12

Tractor oneCase-IH 5240 (DT)1989–1997No measured PTO figureTractor twoWHITE 61051992–1997No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their power is identical, with the same weight or the same engine, which usually means one machine sold under two names; any difference below comes from how each source describes it. The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

7 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH 5240 (DT) and WHITE 6105, field by field
Field5240 (DT)6105Gap
Engine
Engine power, claimed claimed106.5 hp106.5 hp—
Engine declaredCUMMINS NCE 6 T-590S.L.H. 1000.6 Wdiffers
Displacement declared5.88 L6.00 L—
Maximum torque declared326 lb·ft · 442 N·m279 lb·ft · 378 N·m+17% 5240 (DT)
Transmission
Top speed declared15.5–24.9 mph · 25–40 km/h18.6 mph · 30 km/hdiffers
Clutch declared—Pedal operated dry single disc clutch—
Hydraulics & hitch
Pressure declared—2,176 psi · 150 bar—
Rear PTO speeds declared540/1000 rpm540/1000 rpm—
Weight & dimensions
Unladen weight declared10,119 lb · 4,590 kg10,013 lb · 4,542 kg—
Maximum permissible mass declared—14,330 lb · 6,500 kg—
Wheelbase declared103.7 in · 2,634 mm107.5 in · 2,731 mm—
Length declared172.8 in · 4,390 mm157.5 in · 4,000 mm+10% 5240 (DT)
Width declared96.0 in · 2,438 mm87.0 in · 2,210 mm+10% 5240 (DT)
Height, over the cab declared106.9 in · 2,715 mm108.5 in · 2,755 mm—
Ground clearance declared22.1 in · 561 mm20.1 in · 510 mm+10% 5240 (DT)
Turning radius, braked declared—12.5 ft · 3.80 m—
Fuel tank declared179.6 qt · 170.0 L221.9 qt · 210.0 L+24% 6105

Case-IH 5240 (DT) sources

Source
  • Source: Traktorenlexikon, “Case-IH 5240”
  • Source: Traktorenlexikon, “Case-IH 5140”

WHITE 6105 sources

Source
  • Source: Traktorenlexikon, “AGCO-White 6105”
  • Source: Traktorenlexikon, “White 6105”