Case-IH 5240 (DT) vs SAME Antares 110

8 material differences · fewer than 12

Tractor one

1989–1997

No measured PTO figure

Tractor two

1991–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 5240 (DT) and the Antares 110 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH 5240 (DT) and SAME Antares 110, field by field
Field	5240 (DT)	Antares 110	Gap
Engine
Engine power, claimed claimed	106.5 hp	108.5 hp	—
Engine declared	CUMMINS NCE 6 T-590	SAME 1000.6 A	differs
Displacement declared	5.88 L	6.00 L	—
Maximum torque declared	326 lb·ft · 442 N·m	256 lb·ft · 347 N·m	+27% 5240 (DT)
Transmission
Top speed declared	15.5–24.9 mph · 25–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	—	Pedal-operated dry S.L.H. single-plate clutch	—
Hydraulics & hitch
Pump flow declared	—	16.3 gpm · 61.7 L/min	—
Pressure declared	—	2,176 psi · 150 bar	—
Three-point lift at ends declared	10,027 lb · 4,548 kg	11,442 lb · 5,190 kg	+14% Antares 110
Rear PTO speeds declared	540/1000 rpm	540/540E/1000E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	10,119 lb · 4,590 kg	10,703 lb · 4,855 kg	+6% Antares 110
Maximum permissible mass declared	—	16,535 lb · 7,500 kg	—
Wheelbase declared	103.7 in · 2,634 mm	108.3 in · 2,750 mm	—
Length declared	172.8 in · 4,390 mm	180.7 in · 4,590 mm	—
Width declared	96.0 in · 2,438 mm	87.4 in · 2,220 mm	+10% 5240 (DT)
Height declared	106.9 in · 2,715 mm	111.0 in · 2,820 mm	—
Ground clearance declared	22.1 in · 561 mm	22.2 in · 565 mm	—
Turning radius, braked declared	—	16.8 ft · 5.12 m	—
Fuel tank declared	179.6 qt · 170.0 L	243.0 qt · 230.0 L	+35% Antares 110

Source

Source