Case-IH 5240 (DT) vs Massey Ferguson MF 4370 (A)

7 material differences · fewer than 12

Tractor one

1989–1997

No measured PTO figure

Tractor two

2001–2003

No measured PTO figure

Which should you choose?

Read our verdict on the 5240 (DT) and the MF 4370 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH 5240 (DT) and Massey Ferguson MF 4370 (A), field by field
Field	5240 (DT)	MF 4370 (A)	Gap
Engine
Engine power, claimed claimed	106.5 hp	114.5 hp	+8% MF 4370 (A)
Engine declared	CUMMINS NCE 6 T-590	Perkins 1006.6 Turbo	differs
Displacement declared	5.88 L	5.99 L	—
Maximum torque declared	326 lb·ft · 442 N·m	335 lb·ft · 454 N·m	—
Transmission
Top speed declared	15.5–24.9 mph · 25–40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Pedal-operated dry air-cooled single-disc clutch	—
Hydraulics & hitch
Pump flow declared	—	15.8 gpm · 59.9 L/min	—
Pressure declared	—	3,104–3,481 psi · 214–240 bar	—
Three-point lift at ends declared	10,027 lb · 4,548 kg	11,023 lb · 5,000 kg	+10% MF 4370 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	10,119 lb · 4,590 kg	8,534 lb · 3,871 kg	+19% 5240 (DT)
Maximum permissible mass declared	—	16,535 lb · 7,500 kg	—
Wheelbase declared	103.7 in · 2,634 mm	102.8 in · 2,610 mm	—
Length declared	172.8 in · 4,390 mm	173.6 in · 4,410 mm	—
Width declared	96.0 in · 2,438 mm	80.7 in · 2,050 mm	+19% 5240 (DT)
Height declared	106.9 in · 2,715 mm	104.7 in · 2,660 mm	—
Ground clearance declared	22.1 in · 561 mm	20.3 in · 515 mm	+9% 5240 (DT)
Fuel tank declared	179.6 qt · 170.0 L	213.5 qt · 202.0 L	+19% MF 4370 (A)

Source

Source