Case-IH 5240 (DT) vs Fiat F-120 DT

7 material differences · fewer than 12

Tractor one

1989–1997

No measured PTO figure

Tractor two

1990–1993

No measured PTO figure

Which should you choose?

Read our verdict on the 5240 (DT) and the F-120 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH 5240 (DT) and Fiat F-120 DT, field by field
Field	5240 (DT)	F-120 DT	Gap
Engine
Engine power, claimed claimed	106.5 hp	116.4 hp	+9% F-120 DT
Engine declared	CUMMINS NCE 6 T-590	FIAT-IVECO 8065.05 B 330	differs
Displacement declared	5.88 L	5.86 L	—
Maximum torque declared	326 lb·ft · 442 N·m	288 lb·ft · 390 N·m	+13% 5240 (DT)
Transmission
Top speed declared	15.5–24.9 mph · 25–40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Pedal-operated, hydraulic-dry LuK double clutch	—
Hydraulics & hitch
Pump flow declared	—	14.9 gpm · 56.5 L/min	—
Pressure declared	—	3,046–3,118 psi · 210–215 bar	—
Three-point lift at ends declared	10,027 lb · 4,548 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	10,119 lb · 4,590 kg	11,839 lb · 5,370 kg	+17% F-120 DT
Maximum permissible mass declared	—	17,857 lb · 8,100 kg	—
Wheelbase declared	103.7 in · 2,634 mm	106.0 in · 2,692 mm	—
Length declared	172.8 in · 4,390 mm	185.4 in · 4,710 mm	+7% F-120 DT
Width declared	96.0 in · 2,438 mm	91.3 in · 2,320 mm	—
Height declared	106.9 in · 2,715 mm	109.4 in · 2,780 mm	—
Ground clearance declared	22.1 in · 561 mm	19.9 in · 505 mm	+11% 5240 (DT)
Turning radius, braked declared	—	16.3 ft · 4.96 m	—
Fuel tank declared	179.6 qt · 170.0 L	232.5 qt · 220.0 L	+29% F-120 DT

Source

Source