5 material differences · fewer than 12

Tractor oneCase-IH 5240 (DT)1989–1997No measured PTO figureTractor twoEicher 31081982–1990No measured PTO figure

Which should you choose?

Read our verdict on the 5240 (DT) and the 3108 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

5 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH 5240 (DT) and Eicher 3108, field by field
Field5240 (DT)3108Gap
Engine
Engine power, claimed claimed106.5 hp106 hp—
Engine declaredCUMMINS NCE 6 T-590Eicher EDL 6 - 4differs
Displacement declared5.88 L5.89 L—
Maximum torque declared326 lb·ft · 442 N·m——
Transmission
Top speed declared15.5–24.9 mph · 25–40 km/h24.9 mph · 40 km/hdiffers
Clutch declared—Single-plate dry clutch with centrifugal cooling—
Hydraulics & hitch
Pump flow declared—13.4 gpm · 50.6 L/min—
Rear PTO speeds declared540/1000 rpm540/1000 rpm—
Weight & dimensions
Unladen weight declared10,119 lb · 4,590 kg11,905 lb · 5,400 kg+18% 3108
Wheelbase declared103.7 in · 2,634 mm107.5 in · 2,730 mm—
Length declared172.8 in · 4,390 mm167.7 in · 4,260 mm—
Width declared96.0 in · 2,438 mm92.3 in · 2,345 mm—
Ground clearance declared22.1 in · 561 mm18.5 in · 470 mm+19% 5240 (DT)
Fuel tank declared179.6 qt · 170.0 L254.7 qt · 241 L+42% 3108

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Case-IH 5240 (DT) sources

Source
  • Source: Traktorenlexikon, “Case-IH 5240”
  • Source: Traktorenlexikon, “Case-IH 5140”

Eicher 3108 sources

Source
  • Source: Traktorenlexikon, “Eicher 3108”