Case-IH 5230 (DT) vs ZETOR 10641

11 material differences · fewer than 12

Tractor one

1989–1997

No measured PTO figure

Tractor two

1999–2002

No measured PTO figure

Which should you choose?

Read our verdict on the 5230 (DT) and the 10641 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

Case-IH 5230 (DT) and ZETOR 10641, field by field
Field	5230 (DT)	10641	Gap
Engine
Engine power, claimed claimed	97.6 hp	103.5 hp	+6% 10641
Engine declared	CUMMINS NCE 6-590	ZETOR Z-1303	differs
Displacement declared	5.88 L	4.16 L	+42% 5230 (DT)
Maximum torque declared	262 lb·ft · 355 N·m	286 lb·ft · 388 N·m	+9% 10641
Transmission
Top speed declared	15.5–24.9 mph · 25–40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Pedal-operated dry Zetor single-disc clutch	—
Hydraulics & hitch
Pump flow declared	19.9 gpm · 75.3 L/min	17.4 gpm · 66.0 L/min	+14% 5230 (DT)
Pressure declared	—	3,046 psi · 210 bar	—
Three-point lift at ends declared	9,870 lb · 4,477 kg	12,747 lb · 5,782 kg	+29% 10641
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,877 lb · 4,480 kg	8,984 lb · 4,075 kg	+10% 5230 (DT)
Maximum permissible mass declared	—	14,771 lb · 6,700 kg	—
Wheelbase declared	103.7 in · 2,634 mm	94.0 in · 2,388 mm	+10% 5230 (DT)
Length declared	172.8 in · 4,390 mm	172.4 in · 4,380 mm	—
Width declared	96.0 in · 2,438 mm	85.2 in · 2,165 mm	+13% 5230 (DT)
Height declared	106.1 in · 2,695 mm	106.9 in · 2,715 mm	—
Ground clearance declared	22.1 in · 561 mm	15.2 in · 386 mm	+45% 5230 (DT)
Turning radius, braked declared	13.5 ft · 4.13 m	—	—
Fuel tank declared	179.6 qt · 170.0 L	190.2 qt · 180.0 L	+6% 10641

Source

Source