Case-IH 5230 (DT) vs Lamborghini 950 DT

12 material differences

Tractor one

1989–1997

No measured PTO figure

Tractor two

1995–2004

No measured PTO figure

Which should you choose?

Read our verdict on the 5230 (DT) and the 950 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

Case-IH 5230 (DT) and Lamborghini 950 DT, field by field
Field	5230 (DT)	950 DT	Gap
Engine
Engine power, claimed claimed	97.6 hp	93.6 hp	—
Engine declared	CUMMINS NCE 6-590	SAME H-1000.4 WT-2	differs
Displacement declared	5.88 L	4.00 L	+47% 5230 (DT)
Maximum torque declared	262 lb·ft · 355 N·m	243 lb·ft · 329 N·m	+8% 5230 (DT)
Transmission
Top speed declared	15.5–24.9 mph · 25–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	—	Pedal-operated dry S.L.H. single-plate clutch	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	19.9 gpm · 75.3 L/min	16.1 gpm · 61.0 L/min	+23% 5230 (DT)
Pressure declared	—	3,046 psi · 210 bar	—
Three-point lift at ends declared	9,870 lb · 4,477 kg	7,937 lb · 3,600 kg	+24% 5230 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000/540E/1000E rpm	differs
Weight & dimensions
Unladen weight declared	9,877 lb · 4,480 kg	9,436 lb · 4,280 kg	—
Maximum permissible mass declared	—	13,228 lb · 6,000 kg	—
Wheelbase declared	103.7 in · 2,634 mm	93.4 in · 2,373 mm	+11% 5230 (DT)
Length declared	172.8 in · 4,390 mm	149.0 in · 3,785 mm	+16% 5230 (DT)
Width declared	96.0 in · 2,438 mm	72.4 in · 1,840 mm	+33% 5230 (DT)
Height declared	106.1 in · 2,695 mm	106.1 in · 2,695 mm	—
Ground clearance declared	22.1 in · 561 mm	17.5 in · 445 mm	+26% 5230 (DT)
Turning radius, braked declared	13.5 ft · 4.13 m	13.4 ft · 4.07 m	—
Fuel tank declared	179.6 qt · 170.0 L	158.5 qt · 150.0 L	+13% 5230 (DT)

Source

Source