Case-IH 5230 (DT) vs Deutz-Fahr Agrotron 105

8 material differences · fewer than 12

Tractor one

1989–1997

No measured PTO figure

Tractor two

1997–2001

No measured PTO figure

Which should you choose?

Read our verdict on the 5230 (DT) and the Agrotron 105 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 7 fields identical or within 5%, which is not counted as material

Case-IH 5230 (DT) and Deutz-Fahr Agrotron 105, field by field
Field	5230 (DT)	Agrotron 105	Gap
Engine
Engine power, claimed claimed	97.6 hp	98.7 hp	—
Engine declared	CUMMINS NCE 6-590	Deutz. BF6M 1012 E	differs
Displacement declared	5.88 L	4.79 L	+23% 5230 (DT)
Maximum torque declared	262 lb·ft · 355 N·m	278 lb·ft · 377 N·m	+6% Agrotron 105
Transmission
Top speed declared	15.5–24.9 mph · 25–40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	19.9 gpm · 75.3 L/min	17.4 gpm · 66.0 L/min	+14% 5230 (DT)
Three-point lift at ends declared	9,870 lb · 4,477 kg	10,218 lb · 4,635 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,877 lb · 4,480 kg	9,921 lb · 4,500 kg	—
Maximum permissible mass declared	—	16,535 lb · 7,500 kg	—
Wheelbase declared	103.7 in · 2,634 mm	104.2 in · 2,647 mm	—
Length declared	172.8 in · 4,390 mm	176.0 in · 4,470 mm	—
Width declared	96.0 in · 2,438 mm	81.1 in · 2,060 mm	+18% 5230 (DT)
Height declared	106.1 in · 2,695 mm	110.0 in · 2,795 mm	—
Ground clearance declared	22.1 in · 561 mm	19.1 in · 485 mm	+16% 5230 (DT)
Turning radius, braked declared	13.5 ft · 4.13 m	—	—
Fuel tank declared	179.6 qt · 170.0 L	200.8 qt · 190 L	+12% Agrotron 105

Source

Source