Case-IH 5220 (DT) vs WHITE 100

12 material differences

Tractor one

1989–1997

No measured PTO figure

Tractor two

1987–1990

No measured PTO figure

Which should you choose?

Read our verdict on the 5220 (DT) and the 100 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

Case-IH 5220 (DT) and WHITE 100, field by field
Field	5220 (DT)	100	Gap
Engine
Engine power, claimed claimed	92.7 hp	92.0 hp	—
Engine declared	CUMMINS NCE 4 T-390	CUMMINS B 6-590	differs
Displacement declared	3.92 L	5.89 L	+50% 100
Maximum torque declared	237 lb·ft · 321 N·m	261 lb·ft · 354 N·m	+10% 100
Transmission
Top speed declared	15.5–24.9 mph · 25–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Pedal-operated dry single-disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	19.6 gpm · 74.3 L/min	19.0 gpm · 71.9 L/min	—
Pressure declared	3,191 psi · 220 bar	—	—
Three-point lift at ends declared	10,207 lb · 4,630 kg	7,189 lb · 3,261 kg	+42% 5220 (DT)
Rear PTO speeds declared	635/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,818 lb · 4,000 kg	12,000 lb · 5,443 kg	+36% 100
Maximum permissible mass declared	16,535 lb · 7,500 kg	—	—
Wheelbase declared	107.5 in · 2,730 mm	111.5 in · 2,832 mm	—
Length declared	163.0 in · 4,140 mm	173.2 in · 4,400 mm	+6% 100
Width declared	79.7 in · 2,025 mm	96.0 in · 2,438 mm	+20% 100
Height declared	105.2 in · 2,672 mm	117.2 in · 2,978 mm	+11% 100
Ground clearance declared	22.1 in · 561 mm	26.3 in · 667 mm	+19% 100
Turning radius, braked declared	—	11.4 ft · 3.48 m	—
Fuel tank declared	179.6 qt · 170.0 L	100.4–132.1 qt · 95.0–125.0 L	differs

Source

Source