Case-IH 5220 (DT) vs Landini R-9880 (DT) TL-45 N/A (TL-45 DT/A)

10 material differences · fewer than 12

Tractor one

1989–1997

No measured PTO figure

Tractor two

1987–2000

No measured PTO figure

Which should you choose?

Read our verdict on the 5220 (DT) and the R-9880 (DT) TL-45 N/A (TL-45 DT/A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH 5220 (DT) and Landini R-9880 (DT) TL-45 N/A (TL-45 DT/A), field by field
Field	5220 (DT)	R-9880 (DT) TL-45 N/A (TL-45 DT/A)	Gap
Engine
Engine power, claimed claimed	92.7 hp	91.7 hp	—
Engine declared	CUMMINS NCE 4 T-390	Perkins TL 4.236	differs
Displacement declared	3.92 L	3.86 L	—
Maximum torque declared	237 lb·ft · 321 N·m	255 lb·ft · 346 N·m	+8% R-9880 (DT) TL-45 N/A (TL-45 DT/A)
Transmission
Top speed declared	15.5–24.9 mph · 25–40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	19.6 gpm · 74.3 L/min	11.5 gpm · 43.7 L/min	+70% 5220 (DT)
Pressure declared	3,191 psi · 220 bar	—	—
Three-point lift at ends declared	10,207 lb · 4,630 kg	7,893 lb · 3,580 kg	+29% 5220 (DT)
Rear PTO speeds declared	635/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,818 lb · 4,000 kg	7,893 lb · 3,580 kg	+12% 5220 (DT)
Maximum permissible mass declared	16,535 lb · 7,500 kg	—	—
Wheelbase declared	107.5 in · 2,730 mm	97.0 in · 2,463 mm	+11% 5220 (DT)
Length declared	163.0 in · 4,140 mm	155.5 in · 3,950 mm	—
Width declared	79.7 in · 2,025 mm	80.3 in · 2,040 mm	—
Height declared	105.2 in · 2,672 mm	107.3 in · 2,725 mm	—
Ground clearance declared	22.1 in · 561 mm	18.1 in · 460 mm	+22% 5220 (DT)
Turning radius, braked declared	—	12.8 ft · 3.89 m	—
Fuel tank declared	179.6 qt · 170.0 L	107.8 qt · 102.0 L	+67% 5220 (DT)

Source

Source