Case-IH 5220 (DT) vs Deutz-Fahr Agroplus 95

10 material differences · fewer than 12

Tractor one

1989–1997

No measured PTO figure

Tractor two

1997–2005

No measured PTO figure

Which should you choose?

Read our verdict on the 5220 (DT) and the Agroplus 95 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 3 fields identical or within 5%, which is not counted as material

Case-IH 5220 (DT) and Deutz-Fahr Agroplus 95, field by field
Field	5220 (DT)	Agroplus 95	Gap
Engine
Engine power, claimed claimed	92.7 hp	92.8 hp	—
Engine declared	CUMMINS NCE 4 T-390	—	—
Displacement declared	3.92 L	—	—
Maximum torque declared	237 lb·ft · 321 N·m	263 lb·ft · 357 N·m	+11% Agroplus 95
Transmission
Top speed declared	15.5–24.9 mph · 25–40 km/h	24.9 mph · 40 km/h	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	19.6 gpm · 74.3 L/min	—	—
Pressure declared	3,191 psi · 220 bar	—	—
Three-point lift at ends declared	10,207 lb · 4,630 kg	10,803 lb · 4,900 kg	+6% Agroplus 95
Rear PTO speeds declared	635/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,818 lb · 4,000 kg	8,378 lb · 3,800 kg	+5% 5220 (DT)
Maximum permissible mass declared	16,535 lb · 7,500 kg	13,669 lb · 6,200 kg	+21% 5220 (DT)
Wheelbase declared	107.5 in · 2,730 mm	92.1 in · 2,340 mm	+17% 5220 (DT)
Length declared	163.0 in · 4,140 mm	146.2 in · 3,714 mm	+11% 5220 (DT)
Width declared	79.7 in · 2,025 mm	81.1 in · 2,060 mm	—
Height declared	105.2 in · 2,672 mm	103.3 in · 2,624 mm	—
Ground clearance declared	22.1 in · 561 mm	18.6 in · 472 mm	+19% 5220 (DT)
Fuel tank declared	179.6 qt · 170.0 L	147.9 qt · 140 L	+21% 5220 (DT)

Source

Source