Case-IH 5220 (DT) vs Case-Steyr M 9094 a

10 material differences · fewer than 12

Tractor one

1989–1997

No measured PTO figure

Tractor two

1994–2003

No measured PTO figure

Which should you choose?

Read our verdict on the 5220 (DT) and the M 9094 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

Case-IH 5220 (DT) and Case-Steyr M 9094 a, field by field
Field	5220 (DT)	M 9094 a	Gap
Engine
Engine power, claimed claimed	92.7 hp	92.8 hp	—
Engine declared	CUMMINS NCE 4 T-390	Steyr-MWM WD 401.85	differs
Displacement declared	3.92 L	4.16 L	+6% M 9094 a
Maximum torque declared	237 lb·ft · 321 N·m	—	—
Transmission
Top speed declared	15.5–24.9 mph · 25–40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Dry Fichtel & Sachs double clutch	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	19.6 gpm · 74.3 L/min	—	—
Pressure declared	3,191 psi · 220 bar	—	—
Three-point lift at ends declared	10,207 lb · 4,630 kg	9,480 lb · 4,300 kg	+8% 5220 (DT)
Rear PTO speeds declared	635/1000 rpm	430/540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,818 lb · 4,000 kg	8,708 lb · 3,950 kg	—
Maximum permissible mass declared	16,535 lb · 7,500 kg	14,330 lb · 6,500 kg	+15% 5220 (DT)
Wheelbase declared	107.5 in · 2,730 mm	97.7 in · 2,481 mm	+10% 5220 (DT)
Length declared	163.0 in · 4,140 mm	165.9 in · 4,215 mm	—
Width declared	79.7 in · 2,025 mm	85.4 in · 2,170 mm	+7% M 9094 a
Height declared	105.2 in · 2,672 mm	100.4 in · 2,550 mm	—
Ground clearance declared	22.1 in · 561 mm	17.3 in · 440 mm	+28% 5220 (DT)
Turning radius, braked declared	—	14.1 ft · 4.30 m	—
Fuel tank declared	179.6 qt · 170.0 L	105.7 qt · 100.0 L	+70% 5220 (DT)

Source

Source