Case-IH 5130 Maxxum vs Deutz-Fahr Agroplus 100
7 material differences · fewer than 12
Which should you choose?
Read our verdict on the 5130 Maxxum and the Agroplus 100 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 5130 Maxxum | Agroplus 100 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 98.6 hp | 97.8 hp | — |
| Engine declared | CUMMINS NCE 6-590 | — | — |
| Displacement declared | 5.88 L | — | — |
| Maximum torque declared | — | 282 lb·ft · 383 N·m | — |
| Transmission | |||
| Top speed declared | 15.5–24.9 mph · 25–40 km/h | 24.9 mph · 40 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 19.1 gpm · 72.4 L/min | — | — |
| Pressure declared | 3,191 psi · 220 bar | — | — |
| Three-point lift at ends declared | — | 14,330 lb · 6,500 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 11,100 lb · 5,035 kg | 9,855 lb · 4,470 kg | +13% 5130 Maxxum |
| Maximum permissible mass declared | 17,196 lb · 7,800 kg | 15,873 lb · 7,200 kg | +8% 5130 Maxxum |
| Wheelbase declared | 101.8 in · 2,585 mm | 101.1 in · 2,568 mm | — |
| Length declared | 175.3 in · 4,453 mm | 155.2 in · 3,943 mm | +13% 5130 Maxxum |
| Width declared | 86.8 in · 2,204 mm | 81.1 in · 2,060 mm | +7% 5130 Maxxum |
| Height declared | 106.1 in · 2,695 mm | 103.3 in · 2,624 mm | — |
| Ground clearance declared | 18.0 in · 457 mm | 19.1 in · 484 mm | +6% Agroplus 100 |
| Turning radius, braked declared | 13.5 ft · 4.13 m | — | — |
| Fuel tank declared | 142.7 qt · 135.0 L | 147.9 qt · 140 L | — |
Case-IH 5130 Maxxum sources
Source
- Source: Traktorenlexikon, “Case-IH 5130”
Deutz-Fahr Agroplus 100 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr Agroplus 100”