Case-IH 5120 Maxxum vs VALMET 705/705-4

9 material differences · fewer than 12

Tractor one

1989–1997

No measured PTO figure

Tractor two

1983–1989

No measured PTO figure

Which should you choose?

Read our verdict on the 5120 Maxxum and the 705/705-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH 5120 Maxxum and VALMET 705/705-4, field by field
Field	5120 Maxxum	705/705-4	Gap
Engine
Engine power, claimed claimed	88.8 hp	82 hp	+9% 5120 Maxxum
Engine declared	CUMMINS NCE 4 TA-390 or NCE 4 T-390	VALMET TD 44 DS 7	differs
Displacement declared	3.92 L	4.40 L	+12% 705/705-4
Maximum torque declared	243 lb·ft · 330 N·m	235 lb·ft · 318 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Case-Poclain multi-disc clutch running in an oil bath	Pedal-operated, dry LuK single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	19.8 gpm · 75.0 L/min	12.7 gpm · 48.0 L/min	+56% 5120 Maxxum
Pressure declared	3,191 psi · 220 bar	3,191 psi · 220 bar	—
Three-point lift at ends declared	9,555 lb · 4,334 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	11,718 lb · 5,315 kg	8,356 lb · 3,790 kg	+40% 5120 Maxxum
Maximum permissible mass declared	16,535 lb · 7,500 kg	—	—
Wheelbase declared	92.3 in · 2,345 mm	93.9 in · 2,385 mm	—
Length declared	165.9 in · 4,213 mm	177.8 in · 4,515 mm	+7% 705/705-4
Width declared	86.8 in · 2,204 mm	83.9 in · 2,130 mm	—
Height declared	106.1 in · 2,695 mm	105.1 in · 2,670 mm	—
Ground clearance declared	18.4 in · 467 mm	18.8 in · 478 mm	—
Turning radius, braked declared	13.2 ft · 4.01 m	—	—
Fuel tank declared	142.7 qt · 135.0 L	190.2 qt · 180.0 L	+33% 705/705-4

Source

Source