Case-IH 3220 (DT) vs Steyr 8060 (a)

10 material differences · fewer than 12

Tractor one

1993–1998

No measured PTO figure

Tractor two

1979–1992

No measured PTO figure

Which should you choose?

Read our verdict on the 3220 (DT) and the 8060 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

Case-IH 3220 (DT) and Steyr 8060 (a), field by field
Field	3220 (DT)	8060 (a)	Gap
Engine
Engine power, claimed claimed	51.2 hp	47.3 hp	+8% 3220 (DT)
Engine declared	IHC D-179	Steyr WD-311.41 or WD-311.87	differs
Displacement declared	2.93 L	2.59 L	+13% 3220 (DT)
Maximum torque declared	134 lb·ft · 182 N·m	—	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal operated dry single-plate clutch	Dry Fichtel & Sachs double clutch	differs
Hydraulics & hitch
Pump flow declared	—	6.4 gpm · 24.1 L/min	—
Pressure declared	—	3,553 psi · 245 bar	—
Three-point lift at ends declared	5,401 lb · 2,450 kg	4,850 lb · 2,200 kg	+11% 3220 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,897 lb · 2,675 kg	5,335 lb · 2,420 kg	+11% 3220 (DT)
Wheelbase declared	79.8 in · 2,027 mm	80.1 in · 2,035 mm	—
Length declared	139.2 in · 3,535 mm	137.6 in · 3,495 mm	—
Width declared	72.4 in · 1,840 mm	67.3 in · 1,710 mm	+8% 3220 (DT)
Height declared	93.5 in · 2,376 mm	92.9 in · 2,360 mm	—
Ground clearance declared	9.3 in · 236 mm	14.2 in · 360 mm	+53% 8060 (a)
Turning radius, braked declared	11.5 ft · 3.50 m	10.6 ft · 3.24 m	+8% 3220 (DT)
Fuel tank declared	118.3 qt · 112.0 L	101.4 qt · 96.0 L	+17% 3220 (DT)

Source

Source