Case-IH 3220 (DT) vs SOMECA 480-8 (TD)

13 material differences

Tractor one

1993–1998

No measured PTO figure

Tractor two

1981–1982

No measured PTO figure

Which should you choose?

Read our verdict on the 3220 (DT) and the 480-8 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 2 fields identical or within 5%, which is not counted as material

Case-IH 3220 (DT) and SOMECA 480-8 (TD), field by field
Field	3220 (DT)	480-8 (TD)	Gap
Engine
Engine power, claimed claimed	51.2 hp	47.3 hp	+8% 3220 (DT)
Engine declared	IHC D-179	FIAT-IVECO 8035.02.200 (300)	differs
Displacement declared	2.93 L	2.59 L	+13% 3220 (DT)
Maximum torque declared	134 lb·ft · 182 N·m	112 lb·ft · 152 N·m	+20% 3220 (DT)
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5 mph · 25 km/h	+20% 3220 (DT)
Clutch declared	Pedal operated dry single-plate clutch	Dry FERODO double clutch	differs
Hydraulics & hitch
Pump flow declared	—	7.1 gpm · 26.8 L/min	—
Pressure declared	—	2,843 psi · 196 bar	—
Three-point lift at ends declared	5,401 lb · 2,450 kg	3,858 lb · 1,750 kg	+40% 3220 (DT)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,897 lb · 2,675 kg	3,990 lb · 1,810 kg	+48% 3220 (DT)
Wheelbase declared	79.8 in · 2,027 mm	76.9 in · 1,953 mm	—
Length declared	139.2 in · 3,535 mm	114.6 in · 2,910 mm	+21% 3220 (DT)
Width declared	72.4 in · 1,840 mm	70.5 in · 1,790 mm	—
Height declared	93.5 in · 2,376 mm	87.6 in · 2,225 mm	+7% 3220 (DT)
Ground clearance declared	9.3 in · 236 mm	17.9 in · 455 mm	+93% 480-8 (TD)
Turning radius, braked declared	11.5 ft · 3.50 m	9.7 ft · 2.95 m	+19% 3220 (DT)
Fuel tank declared	118.3 qt · 112.0 L	57.1 qt · 54.0 L	+107% 3220 (DT)

Source

Source