12 material differences
Tractor oneCase-IH 3220 (DT)1993–1998No measured PTO figureTractor twoHürlimann XE 55 Tradition2005–2009No measured PTO figure
Which should you choose?
Read our verdict on the 3220 (DT) and the XE 55 Tradition → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 3220 (DT) | XE 55 Tradition | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 51.2 hp | 51.2 hp | — |
| Engine declared | IHC D-179 | SAME-DEUTZ-FAHR 1000.3 W (EURO-II) | differs |
| Displacement declared | 2.93 L | 3.00 L | — |
| Maximum torque declared | 134 lb·ft · 182 N·m | 151 lb·ft · 205 N·m | +13% XE 55 Tradition |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 24.9 mph · 40 km/h | +33% XE 55 Tradition |
| Clutch declared | Pedal operated dry single-plate clutch | Pedal operated dry single disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pressure declared | — | 3,046 psi · 210 bar | — |
| Three-point lift, at the coupling points declared | 5,401 lb · 2,450 kg | 6,614 lb · 3,000 kg | +22% XE 55 Tradition |
| Rear PTO speeds declared | 540/1000 rpm | 540/540E rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,897 lb · 2,675 kg | 4,806 lb · 2,180 kg | +23% 3220 (DT) |
| Wheelbase declared | 79.8 in · 2,027 mm | 75.8 in · 1,925 mm | +5% 3220 (DT) |
| Length declared | 139.2 in · 3,535 mm | 121.5 in · 3,085 mm | +15% 3220 (DT) |
| Width declared | 72.4–90.6 in · 1,840–2,300 mm | 64.6–80.3 in · 1,640–2,040 mm | differs |
| Ground clearance declared | 9.3 in · 236 mm | 13.2 in · 335 mm | +42% XE 55 Tradition |
| Turning radius, braked declared | 11.5 ft · 3.50 m | — | — |
| Fuel tank declared | 118.3 qt · 112.0 L | 52.8 qt · 50.0 L | +124% 3220 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH 3220 (DT) sources
Source
- Source: Traktorenlexikon, “Case-IH 3220”
- Source: Traktorenlexikon, “IHC 553”
Hürlimann XE 55 Tradition sources
Source
- Source: Traktorenlexikon, “Hürlimann XE 55 Tradition”