9 material differences · fewer than 12
Tractor oneCase-IH 32101993–1998No measured PTO figureTractor twoJohn Deere 2000 (A)1993–1996No measured PTO figure
Which should you choose?
Read our verdict on the 3210 and the 2000 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 3210 | 2000 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.4 hp | 44.4 hp | — |
| Engine declared | IHC D-155 | ZETOR 5201 | differs |
| Displacement declared | 2.54 L | 2.70 L | +6% 2000 (A) |
| Maximum torque declared | 117 lb·ft · 159 N·m | 117 lb·ft · 158 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | pedal-operated dry Laycock single-disc clutch | Dry Zetor double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 8.5 gpm · 32.0 L/min | — |
| Pressure declared | — | 1,160 psi · 80 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,997 lb · 2,720 kg | 6,382 lb · 2,895 kg | +6% 2000 (A) |
| Maximum permissible mass declared | — | 12,125 lb · 5,500 kg | — |
| Wheelbase declared | 79.0 in · 2,007 mm | 83.2 in · 2,114 mm | +5% 2000 (A) |
| Length declared | 139.2 in · 3,535 mm | 143.3 in · 3,640 mm | — |
| Width declared | 72.4–90.6 in · 1,840–2,300 mm | 70.9–85.8 in · 1,800–2,180 mm | differs |
| Height, over the cab declared | 93.5 in · 2,376 mm | 103.9 in · 2,640 mm | +11% 2000 (A) |
| Ground clearance declared | 8.5 in · 215 mm | 14.8 in · 375 mm | +74% 2000 (A) |
| Turning radius, braked declared | 11.5 ft · 3.50 m | — | — |
| Fuel tank declared | 118.3 qt · 112.0 L | 74.0 qt · 70.0 L | +60% 3210 |
Case-IH 3210 sources
Source
- Source: Traktorenlexikon, “Case-IH 3210”
John Deere 2000 (A) sources
Source
- Source: Traktorenlexikon, “John Deere 2000”