11 material differences · fewer than 12

Tractor oneCase-IH 32101993–1998No measured PTO figureTractor twoFiat 45-66 (DT)1992–1996No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (39%). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

11 material differences · 3 fields identical or within 5%, which is not counted as material

Case-IH 3210 and Fiat 45-66 (DT), field by field
Field	3210	45-66 (DT)	Gap
Engine
Engine power, claimed claimed	44.4 hp	44.4 hp	—
Engine declared	IHC D-155	Fiat 8035.06	differs
Displacement declared	2.54 L	2.71 L	+7% 45-66 (DT)
Maximum torque declared	117 lb·ft · 159 N·m	107 lb·ft · 144.6 N·m	+10% 3210
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	pedal-operated dry Laycock single-disc clutch	—	—
Hydraulics & hitch
Pump flow declared	—	9.1 gpm · 34.5 L/min	—
Pressure declared	—	3,118 psi · 215 bar	—
Three-point lift, at the coupling points declared	5,401 lb · 2,450 kg	4,685 lb · 2,125 kg	+15% 3210
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,997 lb · 2,720 kg	4,321 lb · 1,960 kg	+39% 3210
Wheelbase declared	79.0 in · 2,007 mm	78.7 in · 1,999 mm	—
Length declared	139.2 in · 3,535 mm	127.6 in · 3,240 mm	+9% 3210
Width declared	72.4–90.6 in · 1,840–2,300 mm	60.6–84.3 in · 1,540–2,140 mm	differs
Height, over the cab declared	93.5 in · 2,376 mm	89.4 in · 2,270 mm	—
Ground clearance declared	8.5 in · 215 mm	14.8 in · 375 mm	+74% 45-66 (DT)
Turning radius, braked declared	11.5 ft · 3.50 m	—	—
Fuel tank declared	118.3 qt · 112.0 L	44.4 qt · 42.0 L	+167% 3210

Case-IH 3210 sources

Source

Source: Traktorenlexikon, “Case-IH 3210”

Fiat 45-66 (DT) sources