BUKH DZ-30 vs Güldner A 2 L (Tessin)

10 material differences · fewer than 12

Tractor one

1956–1958

No measured PTO figure

Tractor two

1959–1962

No measured PTO figure

Which should you choose?

Read our verdict on the DZ-30 and the A 2 L (Tessin) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

BUKH DZ-30 and Güldner A 2 L (Tessin), field by field
Field	DZ-30	A 2 L (Tessin)	Gap
Engine
Engine power, claimed claimed	29.6 hp	19.6 hp	+51% DZ-30
Engine declared	BUKH 2 EV-100	Güldner 2 LD	differs
Displacement declared	2.04 L	1.31 L	+56% DZ-30
Maximum torque declared	—	54 lb·ft · 73 N·m	—
Transmission
Top speed declared	12.4 mph · 20 km/h	12.4 mph · 20.0 km/h	—
Clutch declared	—	Pedal operated dry Fichtel and Sachs single disc clutch	—
Hydraulics & hitch
Pump flow declared	3.6 gpm · 13.5 L/min	3.3 gpm · 12.5 L/min	+8% DZ-30
Pressure declared	1,991 psi · 137 bar	2,134 psi · 147 bar	+7% A 2 L (Tessin)
Three-point lift at ends declared	1,477 lb · 670 kg	—	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	3,571 lb · 1,620 kg	2,954 lb · 1,340 kg	+21% DZ-30
Maximum permissible mass declared	—	4,409 lb · 2,000 kg	—
Wheelbase declared	71.7 in · 1,820 mm	72.8 in · 1,850 mm	—
Length declared	110.4 in · 2,805 mm	121.3 in · 3,080 mm	+10% A 2 L (Tessin)
Width declared	64.6 in · 1,640 mm	59.8 in · 1,520 mm	+8% DZ-30
Height declared	65.9 in · 1,675 mm	54.5 in · 1,385 mm	+21% DZ-30
Ground clearance declared	17.7 in · 450 mm	14.2 in · 360 mm	+25% DZ-30
Turning radius, braked declared	10.2 ft · 3.10 m	8.7 ft · 2.65 m	+17% DZ-30
Fuel tank declared	38.0 qt · 36.0 L	37.0 qt · 35 L	—

Source

Source