BUKH 554 (Super) or John Deere 1130 (A)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 554 (Super) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1130 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The BUKH 554 (Super) suits loader and hydraulic implement work better on this data: 33% (8.0 L/min / 2.1 gpm) more hydraulic flow.
  • The John Deere 1130 (A) suits heavy draft work (ploughing, cultivating) better on this data: four-wheel drive.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for BUKH 554 (Super) and John Deere 1130 (A), with the call on each
Question554 (Super)1130 (A)Call
Which puts more power through the PTO shaft?37.5 kW (50.3 hp)Traktorenlexikon, “Bukh Super 554”37.5 kW (50.3 hp)Traktorenlexikon, “John Deere 1130”Not comparableNot comparable on power at the PTO shaft: the 554 (Super) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1130 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 554 (Super) and the 1130 (A).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 554 (Super) and the 1130 (A).
Which pumps more oil for implements?32.0 L/min (8.5 gpm)Traktorenlexikon, “Bukh Super 554”24.0 L/min (6.3 gpm)Traktorenlexikon, “John Deere 1130”AheadThe BUKH 554 (Super) has 33% more hydraulic flow (8.0 L/min / 2.1 gpm) than the John Deere 1130 (A) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?1,800 kg (3,968 lb)Traktorenlexikon, “Bukh Super 554”1,860 kg (4,101 lb)Traktorenlexikon, “John Deere 1130”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?2,490 kg (5,490 lb)Traktorenlexikon, “Bukh Super 554”2,291 kg (5,051 lb)Traktorenlexikon, “John Deere 1130”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?—3,500 kg (7,716 lb)Traktorenlexikon, “John Deere 1130”No figureNo call on maximum permissible mass: no figure on record for the 554 (Super).
Which has the wider choice of gears?8Traktorenlexikon, “Bukh Super 554”8 to 16Traktorenlexikon, “John Deere 1130”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?YesTraktorenlexikon, “Bukh Super 554”—No figureNo call on a creeper range: not stated for the 1130 (A).
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “Bukh Super 554”25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “John Deere 1130”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Bukh Super 554”540 rpm / 1000 rpmTraktorenlexikon, “John Deere 1130”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Bukh Super 554”independentTraktorenlexikon, “John Deere 1130”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WDTraktorenlexikon, “Bukh Super 554”Two-wheel or four-wheel driveTraktorenlexikon, “John Deere 1130”AheadThe John Deere 1130 (A) is available with four-wheel drive; the BUKH 554 (Super) is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1963–19671974–1977Ahead (a fact, not an advantage)The John Deere 1130 (A) is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The BUKH 554 (Super) has 33% more hydraulic flow (8.0 L/min / 2.1 gpm) than the John Deere 1130 (A) (both pump flow, as stated by the source).
  • The John Deere 1130 (A) is available with four-wheel drive; the BUKH 554 (Super) is two-wheel drive (as stated by the sources).
  • The John Deere 1130 (A) is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Not comparable on power at the PTO shaft: the 554 (Super) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1130 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources