BUKH 403 (Super) or Nuffield 3/42 (342)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 403 (Super) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 3/42 (342) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Nuffield 3/42 (342) suits loader and hydraulic implement work better on this data: 71% (11.3 L/min / 3.0 gpm) more hydraulic flow and 17% (184 kg / 406 lb) more three-point lift.
  • The BUKH 403 (Super) suits road haulage better on this data: 25% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for BUKH 403 (Super) and Nuffield 3/42 (342), with the call on each
Question403 (Super)3/42 (342)Call
Which puts more power through the PTO shaft?29.4 kW (39.4 hp)Traktorenlexikon, “Bukh Super 403”29.7 kW (39.8 hp)Traktorenlexikon, “Nuffield 3/42 (1961-1963)”Not comparableNot comparable on power at the PTO shaft: the 403 (Super) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 3/42 (342) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 403 (Super) and the 3/42 (342).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 403 (Super) and the 3/42 (342).
Which pumps more oil for implements?16.0 L/min (4.2 gpm)Traktorenlexikon, “Bukh Super 403”27.3 L/min (7.2 gpm)Traktorenlexikon, “Nuffield 3/42 (1961-1963)”AheadThe Nuffield 3/42 (342) has 71% more hydraulic flow (11.3 L/min / 3.0 gpm) than the BUKH 403 (Super) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?1,100 kg (2,425 lb)Traktorenlexikon, “Bukh Super 403”1,284 kg (2,831 lb)Traktorenlexikon, “Nuffield 3/42 (1961-1963)”AheadThe Nuffield 3/42 (342) has 17% more lift (184 kg / 406 lb) than the BUKH 403 (Super) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?1,865 kg (4,112 lb)Traktorenlexikon, “Bukh Super 403”1,964 kg (4,330 lb)Traktorenlexikon, “Nuffield 3/42 (1961-1963)”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the 403 (Super) and the 3/42 (342).
Which has the wider choice of gears?8Traktorenlexikon, “Bukh Super 403”5Traktorenlexikon, “Nuffield 3/42 (1961-1963)”AheadThe BUKH 403 (Super) has 60% more forward gears (3 gears) than the Nuffield 3/42 (342) (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 403 (Super) and the 3/42 (342).
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “Bukh Super 403”20 km/h (12.4 mph)Traktorenlexikon, “Nuffield 3/42 (1961-1963)”AheadThe BUKH 403 (Super) has 25% more top speed (5.0 km/h / 3.1 mph) than the Nuffield 3/42 (342) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Bukh Super 403”540 rpmTraktorenlexikon, “Nuffield 3/42 (1961-1963)”AheadThe BUKH 403 (Super) offers 1000 rpm at the PTO, which the Nuffield 3/42 (342) does not (as stated by the sources).
Which PTO runs independently of the ground drive?——No figureNo call on PTO independence: not stated for the 403 (Super) and the 3/42 (342).
Which drives on both axles?2WDTraktorenlexikon, “Bukh Super 403”2WDTraktorenlexikon, “Nuffield 3/42 (1961-1963)”EvenEven on drive: all two-wheel drive.
Which is newer, and what about parts?1963–19671961–1964EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Nuffield 3/42 (342) has 71% more hydraulic flow (11.3 L/min / 3.0 gpm) than the BUKH 403 (Super) (both pump flow, as stated by the source).
  • The Nuffield 3/42 (342) has 17% more lift (184 kg / 406 lb) than the BUKH 403 (Super) (both lift at the hitch ends, as stated by the source).
  • The BUKH 403 (Super) has 60% more forward gears (3 gears) than the Nuffield 3/42 (342) (both forward gears, as stated by the source).
  • The BUKH 403 (Super) has 25% more top speed (5.0 km/h / 3.1 mph) than the Nuffield 3/42 (342) (both top speed forward, as stated by the source).
  • The BUKH 403 (Super) offers 1000 rpm at the PTO, which the Nuffield 3/42 (342) does not (as stated by the sources).
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on drive: all two-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 403 (Super) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 3/42 (342) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources