Bührer RP-21 Super (A) or IMR-RAKOVICA R-76 Standard?

Which should you choose?

On performance, every comparable figure that differs favours the IMR-RAKOVICA R-76 Standard: hydraulic flow. It is also ahead on top speed. On features, the Bührer RP-21 Super (A) is ahead on forward gears and drive.

  • The IMR-RAKOVICA R-76 Standard suits loader and hydraulic implement work better on this data: 53% (10.4 L/min / 2.7 gpm) more hydraulic flow.
  • The Bührer RP-21 Super (A) suits heavy draft work (ploughing, cultivating) better on this data: 16% (369 kg / 814 lb) heavier and four-wheel drive.
  • The IMR-RAKOVICA R-76 Standard suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Bührer RP-21 Super (A) and IMR-RAKOVICA R-76 Standard, with the call on each
QuestionRP-21 Super (A)R-76 StandardCall
Which puts more power through the PTO shaft?47.2 kW (63.3 hp)Traktorenlexikon, “Bührer RP 21 Super (A)”47.9 kW (64.2 hp)Traktorenlexikon, “Rakovica R 76”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the RP-21 Super (A) and the R-76 Standard.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the RP-21 Super (A) and the R-76 Standard.
Which pumps more oil for implements?19.5 L/min (5.2 gpm)Traktorenlexikon, “Bührer RP 21 Super (A)”29.9 L/min (7.9 gpm)Traktorenlexikon, “Rakovica R 76”AheadThe IMR-RAKOVICA R-76 Standard has 53% more hydraulic flow (10.4 L/min / 2.7 gpm) than the Bührer RP-21 Super (A) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,200 kg (4,850 lb)Traktorenlexikon, “Bührer RP 21 Super (A)”2,315 kg (5,104 lb)Traktorenlexikon, “Rakovica R 76”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?2,634 kg (5,807 lb)Traktorenlexikon, “Bührer RP 21 Super (A)”2,265 kg (4,993 lb)Traktorenlexikon, “Rakovica R 76”Ahead (a fact, not an advantage)The Bührer RP-21 Super (A) is 16% heavier (369 kg / 814 lb) than the IMR-RAKOVICA R-76 Standard (both unladen weight, as stated by the source).
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the RP-21 Super (A) and the R-76 Standard.
Which has the wider choice of gears?15Traktorenlexikon, “Bührer RP 21 Super (A)”6Traktorenlexikon, “Rakovica R 76”AheadThe Bührer RP-21 Super (A) has 150% more forward gears (9 gears) than the IMR-RAKOVICA R-76 Standard (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the RP-21 Super (A) and the R-76 Standard.
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “Bührer RP 21 Super (A)”30 km/h (18.6 mph)Traktorenlexikon, “Rakovica R 76”AheadThe IMR-RAKOVICA R-76 Standard has 20% more top speed (5.0 km/h / 3.1 mph) than the Bührer RP-21 Super (A) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Bührer RP 21 Super (A)”540 rpmTraktorenlexikon, “Rakovica R 76”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Bührer RP 21 Super (A)”independentTraktorenlexikon, “Rakovica R 76”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Bührer RP 21 Super (A)”2WDTraktorenlexikon, “Rakovica R 76”AheadThe Bührer RP-21 Super (A) is available with four-wheel drive; the IMR-RAKOVICA R-76 Standard is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1969–19751979–1989Ahead (a fact, not an advantage)The IMR-RAKOVICA R-76 Standard is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The IMR-RAKOVICA R-76 Standard has 53% more hydraulic flow (10.4 L/min / 2.7 gpm) than the Bührer RP-21 Super (A) (both pump flow, as stated by the source).
  • The Bührer RP-21 Super (A) is 16% heavier (369 kg / 814 lb) than the IMR-RAKOVICA R-76 Standard (both unladen weight, as stated by the source).
  • The Bührer RP-21 Super (A) has 150% more forward gears (9 gears) than the IMR-RAKOVICA R-76 Standard (both forward gears, as stated by the source).
  • The IMR-RAKOVICA R-76 Standard has 20% more top speed (5.0 km/h / 3.1 mph) than the Bührer RP-21 Super (A) (both top speed forward, as stated by the source).
  • The Bührer RP-21 Super (A) is available with four-wheel drive; the IMR-RAKOVICA R-76 Standard is two-wheel drive (as stated by the sources).
  • The IMR-RAKOVICA R-76 Standard is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Even on PTO independence: every PTO is independent.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources