6 material differences · fewer than 12
Tractor oneBührer Komfort 475 (A)1975–1978No measured PTO figureTractor twoEicher 3554 Büffel 74 A1974–1978No measured PTO figure
Which should you choose?
We will not advise between these two machines, because the drive differs (Two-wheel or four-wheel drive; 4WD). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
6 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | Komfort 475 (A) | 3554 Büffel 74 A | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 69.1 hp | 74 hp | +7% 3554 Büffel 74 A |
| Engine declared | Perkins A 4.248 | Perkins A 4.248 | — |
| Displacement declared | 4.07 L | 4.07 L | — |
| Maximum torque declared | 195 lb·ft · 265 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Hydraulics & hitch | |||
| Pump flow declared | 6.3 gpm · 23.7 L/min | 5.0 gpm · 19 L/min | +25% Komfort 475 (A) |
| Pressure declared | — | 3,046 psi · 210 bar | — |
| Rear PTO speeds declared | 540/800 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,173 lb · 2,800 kg | 7,606 lb · 3,450 kg | +23% 3554 Büffel 74 A |
| Wheelbase declared | 84.7 in · 2,152 mm | 96.5 in · 2,450 mm | +14% 3554 Büffel 74 A |
| Length declared | 143.7 in · 3,650 mm | 149.4 in · 3,795 mm | — |
| Width declared | 75.6 in · 1,920 mm | 77.6 in · 1,970 mm | — |
| Ground clearance declared | 16.5 in · 420 mm | 13.8 in · 350 mm | +20% Komfort 475 (A) |
| Turning radius, braked declared | 11.7 ft · 3.56 m | 14.6 ft · 4.45 m | +25% 3554 Büffel 74 A |
| Fuel tank declared | 67.6 qt · 64.0 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Bührer Komfort 475 (A) sources
- Source: Traktorenlexikon, “Bührer 475/475A”
- Source: Traktorenlexikon, “Massey Ferguson MF 178”
Eicher 3554 Büffel 74 A sources
- Source: Traktorenlexikon, “Eicher 3554 Büffel 74 A”
- Source: Traktorenlexikon, “Massey Ferguson MF 178”