Bührer Komfort 465 (A) or Landini R-7880 (DT)?

Which should you choose?

On performance, every comparable figure that differs favours the Landini R-7880 (DT): hydraulic flow and three-point lift. It is also ahead on top speed and PTO speeds.

  • The Landini R-7880 (DT) suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 1000 rpm.
  • The Landini R-7880 (DT) suits loader and hydraulic implement work better on this data: 67% (14.7 L/min / 3.9 gpm) more hydraulic flow and 39% (875 kg / 1,929 lb) more three-point lift.
  • The Landini R-7880 (DT) suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Bührer Komfort 465 (A) and Landini R-7880 (DT), with the call on each
QuestionKomfort 465 (A)R-7880 (DT)Call
Which puts more power through the PTO shaft?44.2 kW (59.3 hp)Traktorenlexikon, “Bührer 465/465A”44.3 kW (59.4 hp)Traktorenlexikon, “Landini 7880”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Komfort 465 (A) and the R-7880 (DT).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Komfort 465 (A) and the R-7880 (DT).
Which pumps more oil for implements?22.0 L/min (5.8 gpm)Traktorenlexikon, “Bührer 465/465A”36.7 L/min (9.7 gpm)Traktorenlexikon, “Landini 7880”AheadThe Landini R-7880 (DT) has 67% more hydraulic flow (14.7 L/min / 3.9 gpm) than the Bührer Komfort 465 (A) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,225 kg (4,905 lb)Traktorenlexikon, “Bührer 465/465A”3,100 kg (6,834 lb)Traktorenlexikon, “Landini 7880”AheadThe Landini R-7880 (DT) has 39% more lift (875 kg / 1,929 lb) than the Bührer Komfort 465 (A) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?2,590 kg (5,710 lb)Traktorenlexikon, “Bührer 465/465A”3,340 kg (7,363 lb)Traktorenlexikon, “Landini 7880”Ahead (a fact, not an advantage)The Landini R-7880 (DT) is 29% heavier (750 kg / 1,653 lb) than the Bührer Komfort 465 (A) (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the Komfort 465 (A) and the R-7880 (DT).
Which has the wider choice of gears?15Traktorenlexikon, “Bührer 465/465A”12 to 24Traktorenlexikon, “Landini 7880”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Komfort 465 (A) and the R-7880 (DT).
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “Bührer 465/465A”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Landini 7880”AheadThe Landini R-7880 (DT) has 20% more top speed (5.0 km/h / 3.1 mph) than the Bührer Komfort 465 (A) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Bührer 465/465A”540/540E/1000 rpmTraktorenlexikon, “Landini 7880”AheadThe Landini R-7880 (DT) offers 1000 rpm at the PTO, which the Bührer Komfort 465 (A) does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Bührer 465/465A”No figureNo call on PTO independence: not stated for the R-7880 (DT).
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Bührer 465/465A”Two-wheel or four-wheel driveTraktorenlexikon, “Landini 7880”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1975–19781987–2000Ahead (a fact, not an advantage)The Landini R-7880 (DT) is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Landini R-7880 (DT) has 67% more hydraulic flow (14.7 L/min / 3.9 gpm) than the Bührer Komfort 465 (A) (both pump flow, as stated by the source).
  • The Landini R-7880 (DT) has 39% more lift (875 kg / 1,929 lb) than the Bührer Komfort 465 (A) (both lift at the hitch ends, as stated by the source).
  • The Landini R-7880 (DT) is 29% heavier (750 kg / 1,653 lb) than the Bührer Komfort 465 (A) (both unladen weight, as stated by the source).
  • The Landini R-7880 (DT) has 20% more top speed (5.0 km/h / 3.1 mph) than the Bührer Komfort 465 (A) (both top speed forward, as stated by the source).
  • The Landini R-7880 (DT) offers 1000 rpm at the PTO, which the Bührer Komfort 465 (A) does not (as stated by the sources).
  • The Landini R-7880 (DT) is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources