8 material differences · fewer than 12
Tractor oneBührer Komfort 465 (A)1975–1978No measured PTO figureTractor twoInternational Harvester 6741973–1975No measured PTO figure
Which should you choose?
Read our verdict on the Komfort 465 (A) and the 674 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | Komfort 465 (A) | 674 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 64.1 hp | 64.1 hp | — |
| Engine declared | Perkins A 4.236 | INTERNATIONAL-HARVESTER D-239 | differs |
| Displacement declared | 3.87 L | 3.91 L | — |
| Maximum torque declared | 187 lb·ft · 253 N·m | 153 lb·ft · 207 N·m | +22% Komfort 465 (A) |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | — | Pedal-operated dry LAYCOCK single-plate clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 5.8 gpm · 22.0 L/min | 11.1–12.6 gpm · 42.1–47.7 L/min | differs |
| Pressure declared | 2,845 psi · 196 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,710 lb · 2,590 kg | 5,106 lb · 2,316 kg | +12% Komfort 465 (A) |
| Wheelbase declared | 84.7 in · 2,152 mm | 84.5 in · 2,146 mm | — |
| Length declared | 143.7 in · 3,650 mm | 140.6 in · 3,570 mm | — |
| Width declared | 72.6 in · 1,845 mm | 68.9 in · 1,750 mm | +5% Komfort 465 (A) |
| Ground clearance declared | 17.1 in · 435 mm | 14.4 in · 365 mm | +19% Komfort 465 (A) |
| Turning radius, braked declared | — | 10.9 ft · 3.31 m | — |
| Fuel tank declared | — | 81.2 qt · 76.8 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Bührer Komfort 465 (A) sources
- Source: Traktorenlexikon, “Bührer 465/465A”
- Source: Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”
International Harvester 674 sources
- Source: Traktorenlexikon, “IHC 674”
- Source: Traktorenlexikon, “IHC 574”
- Source: Traktorenlexikon, “IHC 674 (USA)”