Bührer Komfort 6105 (A) vs John Deere 2950 (A)

5 material differences · fewer than 12

Tractor one

1975–1978

No measured PTO figure

Tractor two

1983–1988

No measured PTO figure

Which should you choose?

Read our verdict on the Komfort 6105 (A) and the 2950 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

5 material differences · 4 fields identical or within 5%, which is not counted as material

Bührer Komfort 6105 (A) and John Deere 2950 (A), field by field
Field	Komfort 6105 (A)	2950 (A)	Gap
Engine
Engine power, claimed claimed	103.5 hp	83.9 hp	+23% Komfort 6105 (A)
Engine declared	Mercedes-Benz OM 352	—	—
Displacement declared	5.67 L	—	—
Maximum torque declared	260 lb·ft · 353 N·m	—	—
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6 mph · 30 km/h	+20% 2950 (A)
Clutch declared	—	Pedal-operated, dry single-disc clutch as driving clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Pump flow declared	10.3 gpm · 39.0 L/min	23.0 gpm · 87.1 L/min	+123% 2950 (A)
Pressure declared	2,845 psi · 196 bar	—	—
Three-point lift at ends declared	4,850 lb · 2,200 kg	—	—
Rear PTO speeds declared	540/800 rpm	—	—
Weight & dimensions
Unladen weight declared	8,223 lb · 3,730 kg	9,098 lb · 4,127 kg	+11% 2950 (A)
Maximum permissible mass declared	13,669 lb · 6,200 kg	13,184 lb · 5,980 kg	—
Wheelbase declared	97.2 in · 2,470 mm	100.4 in · 2,550 mm	—
Length declared	160.2 in · 4,070 mm	153.1 in · 3,890 mm	—
Width declared	82.7 in · 2,100 mm	79.9 in · 2,029 mm	—
Height declared	97.6 in · 2,480 mm	108.3 in · 2,750 mm	+11% 2950 (A)
Ground clearance declared	15.7 in · 400 mm	25.6 in · 650 mm	+63% 2950 (A)
Turning radius, braked declared	—	12.5 ft · 3.80 m	—
Fuel tank declared	—	129.2 qt · 122.3 L	—

Source

Source