Bührer Komfort 6105 (A) vs International Harvester Farmall 806

6 material differences · fewer than 12

Tractor one

1975–1978

No measured PTO figure

Tractor two

1963–1967

No measured PTO figure

Which should you choose?

Read our verdict on the Komfort 6105 (A) and the Farmall 806 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 3 fields identical or within 5%, which is not counted as material

Bührer Komfort 6105 (A) and International Harvester Farmall 806, field by field
Field	Komfort 6105 (A)	Farmall 806	Gap
Engine
Engine power, claimed claimed	103.5 hp	93.7 hp	+10% Komfort 6105 (A)
Engine declared	Mercedes-Benz OM 352	INTERNATIONAL HARVESTER C-301	differs
Displacement declared	5.67 L	—	—
Maximum torque declared	260 lb·ft · 353 N·m	—	—
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6 mph · 30 km/h	+20% Farmall 806
Clutch declared	—	Pedal operated dry single plate clutch	—
Hydraulics & hitch
Pump flow declared	10.3 gpm · 39.0 L/min	—	—
Pressure declared	2,845 psi · 196 bar	—	—
Three-point lift at ends declared	4,850 lb · 2,200 kg	—	—
Rear PTO speeds declared	540/800 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,223 lb · 3,730 kg	8,651 lb · 3,924 kg	—
Maximum permissible mass declared	13,669 lb · 6,200 kg	—	—
Wheelbase declared	97.2 in · 2,470 mm	101.2 in · 2,570 mm	—
Length declared	160.2 in · 4,070 mm	161.0 in · 4,089 mm	—
Width declared	82.7 in · 2,100 mm	110.0 in · 2,794 mm	+33% Farmall 806
Height declared	97.6 in · 2,480 mm	81.0 in · 2,057 mm	+21% Komfort 6105 (A)
Ground clearance declared	15.7 in · 400 mm	21.4 in · 543 mm	+36% Farmall 806
Turning radius, braked declared	—	9.4 ft · 2.87 m	—
Fuel tank declared	—	168.0 qt · 159.0 L	—

Source

Source