7 material differences · fewer than 12
Tractor oneBOLINDER-MUNKTELL BM-400 Buster1964–1969No measured PTO figureTractor twoKramer 4141970–1972No measured PTO figure
Which should you choose?
Read our verdict on the BM-400 Buster and the 414 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | BM-400 Buster | 414 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 42.0 hp | 42 hp | — |
| Engine declared | PERKINS D-913 | Deutz F3L 912 | differs |
| Displacement declared | 2.50 L | 2.83 L | +13% 414 |
| Maximum torque declared | 121 lb·ft · 164 N·m | 106 lb·ft · 143 N·m | +15% BM-400 Buster |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Hydraulics & hitch | |||
| Pump flow declared | 7.4 gpm · 27.9 L/min | 8.5 gpm · 32.0 L/min | +15% 414 |
| Pressure declared | 2,567 psi · 177 bar | 2,134 psi · 147 bar | +20% BM-400 Buster |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,200 lb · 1,905 kg | 4,696–5,247 lb · 2,130–2,380 kg | differs |
| Wheelbase declared | 82.7 in · 2,100 mm | 78.7 in · 2,000 mm | — |
| Length declared | 123.6 in · 3,140 mm | 136.6 in · 3,470 mm | +11% 414 |
| Width declared | 66.1 in · 1,680 mm | 64.8–67.3 in · 1,645–1,710 mm | — |
| Ground clearance declared | 17.3 in · 440 mm | — | — |
| Turning radius, braked declared | 10.5 ft · 3.20 m | — | — |
| Fuel tank declared | 47.6 qt · 45.0 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
BOLINDER-MUNKTELL BM-400 Buster sources
- Source: Traktorenlexikon, “Bolinder-Munktell T 400 Buster”
- Source: Traktorenlexikon, “Bolinder-Munktell BM 320 Buster”
Kramer 414 sources
- Source: Traktorenlexikon, “Kramer 414”